I also took some pictures of the seal in the pinion and it was hard getting a good pic.
Thats how I installed it the first time, but after still leaking I had my doubts.
Lube has to be getting thru the cable housing assembly.
I ordered a new cable.
Thanks again for the help.
Thanks Dartman,
I replaced the large outer seal o-ring and the assembly is dry around it at the case.
It has to be getting thru the cable housing assembly.
Could you or anyone confirm this is the lip side of the seal in the picture?
1965 Dart with 4 speed, early style pinion is leaking and lube drips off the speedo cable.
Previous owner replaced the seal at some point because of a leak, but it still leaks.
I purchased new seals from Brewers.
After i replaced the seals it still leaks.
I took it back apart to check my work...
I was hoping you would come along and straighten me out :thumbsup:
Yes, I am aware lines are for left and right.
Fine lines even had the crossover lines labeled wrong, right label on left/ left label on right.
I know your correct, catalog listing is wrong with inline tube.
I will just bend fine...
Thanks, I now see inline tubes list a set for 71-72 Dart with disc SDDB6709 which I bought.
They also list a set for 67-70 Dart with disc SDDB6704
I thought all A body 65-72 were KH 4 piston caliper.
Is this typical out of the package fitment for this line?
I know I could bend it into position, but didn't expect engineered from factory lines and cnc bent to be this far off.
The one installed with gray cap is inline tubes.
The one zip tied on top is fine lines.
Lines were ordered for 72 Dart...