WymanV's latest activity

  • WymanV
    A transport full of late model Kias probably wouldn't get a second glance but a trailer full of A body Barracudas would stand out like a...
  • WymanV
    WymanV replied to the thread END LINKS.
    If you still have the factory links just use those for your measurements.
  • WymanV
    WymanV replied to the thread 340 exhaust manifold heat shield.
    For $6000 it better come with a car attached.
  • WymanV
    TTI shorties. It didn't come with any exhaust so I figured if I was going to pay a hefty chunk of change for exhaust I'll skip on the...
  • WymanV
    The 340 is pretty much done. The carb is just sitting on it for the photo op. And that's not my alternator of choice-I'll go with a 100...
    • IMG_20240525_191116541.jpg
  • WymanV
    WymanV replied to the thread Headliner Install Questions.
    I set mine so they contact the padding on the roof (ceiling) so they don't move while the car is running. Would kinda suck if I did all...
  • WymanV
    WymanV replied to the thread Decoding a 340 help please.
    :thumbsup:
  • WymanV
    WymanV replied to the thread Decoding a 340 help please.
    F=1970 W=Windsor Ontario 340=340 P=Premium Fuel (high compression) 2996=Friday, October 10, 1969 0339=339th engine assembled that day
  • WymanV
    WymanV replied to the thread 71 Duster carpet 4 speed.
    I just did mine in my '72 Duster last weekend. I picked up a Walnut Hollow hot knife on ebay-it's a glorified soldering iron with screw...
  • WymanV
    WymanV replied to the thread Fender Lower Mounting Studs.
    I would double nut them and back it out with the inside nut.
  • WymanV
    WymanV replied to the thread Underbody paint advice needed.
    Dynamat and spray-on bed liner? Sounds heavy. And not in a Marty McFly/Doc Brown sorta way. When I did mine I painted all the...
  • WymanV
    WymanV replied to the thread 1972 340 testing by Nick.
    I went with TTIs because the 340 I finally got didn't come with exhaust manifolds at all. My choice was paying a small fortune for stock...
  • WymanV
    WymanV replied to the thread 67 barracuda dash refinishing?.
    https://www.forabodiesonly.com/mopar/threads/1972-duster-340-4-black-on-black-the-endgame.125734/page-4#post-1973013194
  • WymanV
    WymanV replied to the thread Fuel tank sending unit.
    1970-71 Dusters and 1971 Demons had the option for the "Rallye" dash seen in 1967-69 Barracudas. Discontinued for 1972. Photo is my...
    • IMG_20231231_185212499.jpg
  • WymanV
    WymanV replied to the thread Headliner Install Question.
    I cut the channel back about an inch from the end of the bow and I still had to cut it more on some of them while putting it in, so be...
Back
Top