Wow, you know something after all these years with parts, i never paid attention to those caliper mounts, brackets, to see if there are any differences to them.
Guess there officially is a leftie, and a rightie.
I always had them in "pairs" and never looked that close with them.
I'll sell the...
@Janke1010
What you have in the way of calipers is officially known as "slider" calipers.
I do have the hardware that you need to bolt down the calipers to your caliper mounts.
[email protected]
Jim V.
hemi71x
Will the member here on this forum, that contacted me with his pair of shields at XXXX amount of dollars, please get in contact with me, again.
I will buy them from you.
Jim V.
hemi71x
I could use a pair of decent disc brake dust shields that are used on the 1965-72 A body line of cars, with the Kelsey Hayes disc brakes.
I'm not looking for a pair that are in fantastic condition, just a pair of them that are showing their wear and tear on them for being up to 58 year old...
Anyone have a pair of disc brake spindles used on the 65-72 Kelsey Hayes disc brakes system, for the A body line of cars, that your never going to do anything with?
If i find a pair, i can put a disc brake system all together, for a member here on this forum, that's been asking if i have...
No.
At this time, i am advertising a 100%, all there, disc brake set up.
No individual spare parts, at this time.
Can't help this man out, what he's advertising for.
Jim V.
hemi71x
Yes, they were used on all the 65-72 Kelsey Hayes calipers on the Mopar A body line of cars.
FORD 65-66 Mustangs used the same caliper, but FORD engineers were smarter, and just attached the rubber flex line hose right onto the main body of the caliper itself.
Guess you can figure it out from this picture that i just have them zip tied to the calipers on the current KH disc brake set up that i am advertising.
Jim V.
hemi71x
I haven't had any spare sets of those Kelsey Hayes hose brackets in i don't know how long.
They pretty much are on the unobtanium list, in this modern day and age.
In the past, when i needed some, i would advertise for them here, and hope someone would have them to sell to me.
But now a day's...
Those are 73-76 sway bar mount tabs.
Won't work with a factory 67-72 bar.
Sorry, no, haven't had sway bar tabbed LCA's for sale, in quite a long time.
Stuff like that has become unobtanium,out my way, a long time ago, to find.
I have a box full of all the 3 sizes of bolts that were used on those caliper mounts, throughout all the years.
Yes, including the long ones for the 11 3/4" rotors.
[FOR SALE] - 9" Inch DRUM Brake Spindle Parts. Grease Caps, Nuts, Washers, Retainers, Bearings, Seals
Anything here, you need?
Jim V.
hemi71x
I have your parts boxed up, ready to mail out to you, tomorrow morning.
Thank's a lot.
FOR SALE - Complete REAR DEFOG System For The 71-74 B Body Line Of Cars.
I'v got this advertised over on the B bodies site.
Guess you could adapt the switch for use in an A body car.
Jim V.
hemi71x
Would you be interested in the 71-74 B body set up that i have, or the other guys A body set up?
You haven't said.
I don't want to go through the hassle of getting everything off the shelving, if your not interested from the get go.
If someone sends to a USA address that's fine and dandy, but...
Hi white-night
Your heading states either A or B body.
Do you know what everything looks like for the 71-74 B body line of cars?
I 'm positive that i have everything form a 71-74 B body car.
Everything from the switch, wiring, motor, bezel, plastic thing that the tube from the motor attaches to...
[FOR SALE] - UPPER CONTROL ARMS. Big Ball Joint. 73-76 A Body Cars.
I've got UCA's for sale right here on this forum in the suspension parts for sale forum, if your interested.