Search results for query: *

You need or want?? lol

Sorry for the late reply....I used rattle can clear lacquer. It didn't want to stick to the polished moldings at all. Was very touchy to get it to lay down smooth. I had to strip the clear off one molding, do some more polishing and reclear it...ugh. Any way, got it all done and had the car in...

I just bought a whole grill fastener kit off of Ebay for @ $25 that had those in them....35 pieces total. http://www.ebay.com/itm/181298733572?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

I sanded the grill by hand and wiped it down quickly with acetone before I sprayed it. Also I noticed the local parts store had chrome tape that is brighter than the aluminum tape I used. Once I get your molding and my new park light lens I will put the grill together so I can mount it and mask...

Got the moldings polished and cleared, hard to get the clear to lay down nice on freshly polished aluminum........ Got the black texture painted on the grill, still got a ways to go but making progress.

^.thanks however 360Scamp is putting one in the mail to me tomorrow.

Got my welds filled and sanded, got the radiator yoke painted (hey, I know it's not the way Mopar did it....) Also the park lamp reflector is nothing but gray looking primer, I cut some aluminum foil tape and laid it down, it should make the park lamps much brighter. Got the grill masked and...

What they all said,,,,,,,,,,just strive to get the body lines aligned and the gaps fall where they do.

Did some plastic welding..........used the heat gun to straighten out the grill body itself, it was deformed due to the fender bender some years ago. Made some small metal brackets to replace the broken tabs on the grill, the pop rivets are hid under the headlight bezel.

Not really, I bought one of his headlight / relay harness assembles (check it out, nice piece) and to install it I need to take the headlight bezels off. Well that led me to take the grill out as I have been putting off restoring it and the bezels.......... The po just used some epoxy to try to...

I have been using the Dap 230 to caulk my windows at home. Its a good product, doesn't shrink or crack and the tube does say its paintable.

After it dries good you should be able to sand out the runs and spray it again. You will have lots of material on it by the time you are done so it might not age as well as it could, it might be prone to cracking.

Nice to see you jump on it and get it done....looks great with body color bumpers.

Bad Bondo work for sure...........

I have a great looking housing and a mirror................think I am gonna try to figure out how to marry the two and just make a manual adjusting mirror until a nice OE remote one comes along.

guess everybody likes there Taiwan parts but me............

Just need to vent some...........finally have some time to start piddling with my Duster. Ever since I bought it the remote control rear view mirror on the door has not worked. It is a repop from Year One that the PO put on about 4 years ago. I got it off and both the joy stick part has come...

yellow Dusters are cool...............great looking car