Search results for query: *

Found this FEDERAL power steering pump pulley, on one of the storage shelving, in the garage. Selling at $30.00 and what the mailman, will be wanting to your zip code. Payment i accept Pay Pal, or a postal money order.

My current pair of LCA's that i now have for sale. Rebuilt pair #20 And now, this is the very last pair that i have for sale. If i don't find anymore to rebuild, I'm out of business, doing these. And 30, 40, 50, year old cars don't show up anymore at the self serv, Pick-N-Pull wrecking yards...

My current pair of LCA's that i now have for sale. Rebuilt pair #19 And now, this is the very last pair that i have for sale. If i don't find anymore to rebuild, I'm out of business, doing these. And 30, 40, 50, year old cars don't show up anymore at the self serv, Pick-N-Pull wrecking yards...

Well, guess i collected, saved, power steering pump mounting brackets from back in the 70's when cars were find able, to be picked over, at the U-Pull-It wrecking yards out here in California. Ok, here's what i have. 1. PS pump mounting brackets for the old Poly 318 engines with a TRW pump...

I have this power steering pump, mounting bracket for the FEDERAL pump, that is used on the Mopar big block engines. The last one, that i have for sale. Officially i think it was used from the 1969 to 1972 years, but use it on any Federal pump that you want to, and any year engine that your...

These are a pair of disc brake dust shields that are used on the 1973-76 A body cars and 73-74 Barracuda's and Challenger's. These dust shields have the proper center opening for the larger inner wheel bearing that was used during those years. A good dust shield to use when upgrading to the...

I have a small box full of original, 12 point, Strut Rod Nuts, that are used on early to mid 60's A and B body automobiles. Thread diameter is 9/16 x 18. I'll sell a pair, (2 of them) at $14.00. Can mail them out to your zip code in a small, padded mailing envelope. Need your zip code for a...

All these parts are for 9 inch A body DRUM brake spindles, that i am putting up for sale, out of my parts stash, hoard, collection, rat hole. Spindle nuts Washers Nut retainers. Bearings. Seals Grease Caps $20.00 set of spindle nuts, washers, retainers, for both left and right sides. $30.00 set...

My current pair of LCA's that i now have for sale. Rebuilt pair #17. This is the latest rebuilt pair that i have in stock, without sway bar mount tabs on them, for sale. I'm now down to only having two pairs of these LCA's in stock. Get them from me while you still can. These are a pair of...

I have these Slider Type, caliper mounts for sale, that are for the standard 10 3/4" inch brake rotors. All cleaned up, soaked out in a pail of Evaporust, then painted up. Ready to bolt on, and go. Selling at $50.00 for a pair of them. Payment will be thru Pay Pal. I will mail them out in a...

I got around to rebuilding all the single piston calipers that i have in my stash of parts, that i now am putting up for sale, along with the Bendix, 4 piston calipers, that i also have been selling on the "B" bodies forum. Anyway, here's what all these calipers are for, and the applications...

Come to find out i have two sets of factory original, OEM, lower ball joint, to spindle mounting bolts, with the factory, foundry marks, on the head of the bolt. For the A, B, E, line of cars. Note, NOT for 1972 and earlier A body cars. Selling at $30.00 for a set of 4. I guess the best way to...

I have these disc brake spindles, that i am putting up for sale. Please read this ad thoroughly and understand it. Both of these spindles are for the LEFT Side, DRIVERS Side of the car. The spindle pictured on the RIGHT, is used on the 1970-72 B & E body line of cars. It has a smaller diameter...

I also have these Pin Type, and Slider Type, caliper mounts for sale, that are for the standard 10 3/4" inch brake rotors. To go with the single piston calipers that i also have for sale, if you need them. All cleaned up, soaked out in a pail of Evaporust, then painted up. Ready to bolt on...

These are a pair of disc brake dust shields that are used on the 1973-76 A body cars and 73-74 Barracuda's and Challenger's. These dust shields have the proper center opening for the larger inner wheel bearing that was used during those years. A good dust shield to use when upgrading to the...

I have a small box full of original, 12 point, Strut Rod Nuts, that are used on early to mid 60's A and B body automobiles. Thread diameter is 9/16 x 18. I'll sell a pair, (2 of them) at $14.00. Can mail them out to your zip code in a small, padded mailing envelope. Need your zip code for a...

All these parts are for 9 inch A body DRUM brake spindles, that i am putting up for sale, out of my parts stash, hoard, collection, rat hole. Spindle nuts Washers Nut retainers. Bearings. Seals Grease Caps $20.00 set of spindle nuts, washers, retainers, for both left and right sides. $30.00 set...

I got around to rebuilding all the single piston calipers that i have in my stash of parts, that i now am putting up for sale, along with the Bendix, 4 piston calipers, that i also have been selling on the "B" bodies forum. Anyway, here's what all these calipers are for, and the applications...

These are a pair of Rebuilt 65-72 Kelsey Hayes disc brake calipers that are used on the A body cars, during those years, as optional equipment. And can also be used on earlier year cars, if doing a change over to front disc brakes. This is the current pair of calipers that i have for sale, and...

My current pair of LCA's that i now have for sale. Rebuilt pair #17. This is the latest rebuilt pair that i have in stock, without sway bar mount tabs on them, for sale. These are a pair of rebuilt lower control arms that are used on 1962-76 A-body cars such as Duster, Dart, Demon, Valiant...

Putting this FEDERAL power steering pump up for sale, that literally have been hanging on the garage wall for decades. If you don't know the difference between pumps, please look at the last picture in my ad. 1. FEDERAL pump. Bare unit, no pulley or bracket(s) for this one. Has a part number...

I have this power steering pump, mounting bracket for the FEDERAL pump, that is used on the Mopar big block engines. Officially i think it was used from the 1969 to 1972 years, but use it on any Federal pump that you want to, and any year engine that your using. I cleaned it up, soaked it out...

Putting this FEDERAL power steering pump up for sale, that literally have been hanging on the garage wall for decades. If you don't know the difference between pumps, please look at the last picture in my ad. 1. FEDERAL pump. Bare unit, no pulley or bracket(s) for this one. Has a part number...

These are a pair of disc brake dust shields that are used on the 1973-76 A body cars and 73-74 Barracuda's and Challenger's. These dust shields have the proper center opening for the larger inner wheel bearing that was used during those years. A good dust shield to use when upgrading to the...

I have these disc brake spindles, that i am putting up for sale. Please read this ad thoroughly and understand it. Both of these spindles are for the LEFT Side, DRIVERS Side of the car. The spindle pictured on the RIGHT, is used on the 1970-72 B & E body line of cars. It has a smaller diameter...

I also have these Pin Type, and Slider Type, caliper mounts for sale, that are for the standard 10 3/4" inch brake rotors. To go with the single piston calipers that i also have for sale, if you need them. All cleaned up, soaked out in a pail of Evaporust, then painted up. Ready to bolt on...

Come to find out i have two sets of factory original, OEM, lower ball joint, to spindle mounting bolts, with the factory, foundry marks, on the head of the bolt. For the A, B, E, line of cars. Note, NOT for 1972 and earlier A body cars. Selling at $30.00 for a set of 4. I guess the best way to...

I have a small box full of original, 12 point, Strut Rod Nuts, that are used on early to mid 60's A and B body automobiles. Thread diameter is 9/16 x 18. I'll sell a pair, (2 of them) at $14.00. Can mail them out to your zip code in a small, padded mailing envelope. Need your zip code for a...

All these parts are for 9 inch A body DRUM brake spindles, that i am putting up for sale, out of my parts stash, hoard, collection, rat hole. Spindle nuts Washers Nut retainers. Bearings. Seals Grease Caps $20.00 set of spindle nuts, washers, retainers, for both left and right sides. $30.00 set...

I got around to rebuilding all the single piston calipers that i have in my stash of parts, that i now am putting up for sale, along with the Bendix, 4 piston calipers, that i also have been selling on the "B" bodies forum. Anyway, here's what all these calipers are for, and the applications...