Recent content by cryplydog

  1. C

    Add Your Own Caption Part 362

    Get yo dick skinners outa there.
  2. C

    Machinist will not build engine unless roller cam is used!

    Jim, my catalog does not show a p/n for small block. Trend Perf. 800-326-8368
  3. C

    Machinist will not build engine unless roller cam is used!

  4. C

    Machinist will not build engine unless roller cam is used!

    I have been using Trend 513 tool steel SFT's, and pushrods. in comparison they have a huge radius , weigh like 65 grams as compared to 125/130. I don't need heavy springs any longer. I also use Ti. intake valves basically same weight as exh. ss. But i back out at 6300. 512/400. I know this post...
  5. C

    Cylinder wall weld??

    Furthermore, I like 2% thoriated tungstun 1/16" dia. but you may have to go to 3/32". pure argon shielding gas at 10-15 inches. i claim old and forgetful. Pick up a weld directory too.
  6. C

    Cylinder wall weld??

    Hello gentlemen, I guess I will step in on this post. These types of repairs are kind of iffy but seem to work ok on cast iron. I found out that if the block etc. is super clean and ground out, heated up well, and come in with a Tig machine with a 1/8-3/32 499 nickel rod that has had the flux...
  7. C

    Cleaning old aluminum slotted wheels

    What kind of acid for alum wheels?
  8. C

    Not sure this intake will feed 600 hp

  9. C

    Loose some weight.

    Hello A Bodies, I am trying to get my old 64 Polara put back together. My question is what is the weight difference a 1967 B-body 18 spline 4-speed and a 23-spline 4-speed. Also, same difference with the 67 B-body dana-60 powerloc 4:10 and a 8-3/4" powerloc . They are complete units. Thank you...
  10. C

    weight differential

    Hello, can anyone tell me approximately the weight differential of the B-body factory D-60 4 .10 powerloc and a 8-3/4 powerloc and housing complete. Also the complete 23spline as opposed to the 18 spline 4-speed trans. This will my last go around with my old 64 440 or Polara and I don't see the...
  11. C

    Shuebeck lifters?

    I really like my Trend H-13 sft's with oil hole in the face.They also have a GOOD radius on the face. I think 68 grams is the weight, that is alot better than 120-130 grams. I've ran the piss out of them with 3-different cams and getting ready for a 4th build. I think they are cheap at any...
  12. C

    Sacrifice sacrifices

    He must need a little WHISKERBUSCUIT!
  13. C

    Settle an argument for me. Dog related

    ARF! ARF ARF!
  14. C

    Fiberglass hood maker

    GTX, i need a fiberglass hood for my 64 polara. How can I contact you. Thanks.
  15. C

    Unusual Hobbies

    My Kitty doesn't like possums on the patio either but she is too skeerd to shoot a 22. she thinks it will get her fat kittycats.
See more
Back
Top