Solid rollers with off set push rod hole issue.

gg408 said

Spring pressure are both the same on intake and exhaust. Not sure if I should have little more on intake as it is boosted. Valves are 2.05" in & 1.65" exh , 11/32 stem with tool steel retainers and AFR/PAC springs. Waiting to see what cam company has to say.

Click to expand...

Boosted you normally need more spring force to offset the boost pressure working to blow the intake valves open.
Boost pressure × valve head effective area gives pounds force on the valve head. Remember the stem diameter area can be deducted from the valve head area. This pounds force is added to the required spring force for the intake valves.