autopar3000's latest activity
-
autopar3000 replied to the thread Magnum and Wiring Swap.+1 on 75slant6's comment. Watch out for Cherokees too, I think a lot of them had security. Maybe you could google the PCM part number... -
autopar3000 replied to the thread Magnum and Wiring Swap.Maybe it was this article you saw? Not exactly dyno testing, but from a flow perspective the Hughes is still way better than the...
-
autopar3000 replied to the thread Magnum and Wiring Swap.Yeah, people want stupid money for those intakes, I got lucky and found my M1 relatively cheap ($750 CAD). I'm surprised the Hughes...
-
autopar3000 replied to the thread Magnum and Wiring Swap.I have the Mopar M1 intake, a 53 mm throttle body, long tube headers, and the Hughes SER0814ALN-14 cam. My cam has a little less...
-
Not sure why....brain fart, but I thought I posted latest breakin video? Gotta get inner springs installed and one more test run, then...
-
autopar3000 replied to the thread Magnum and Wiring Swap.That cam is on the ragged edge of what the stock tune can deal with. If everything else is set up perfectly then it *should* be OK, but...
-
autopar3000 replied to the thread Magnum and Wiring Swap.Do you know what cam it is exactly? The stock tune will only tolerate so much duration / overlap before it starts to get confused...
-
autopar3000 replied to the thread Oil additives.Love Lake's channel and his approach. I would agree with him that it's not a good idea to use additives with an engine that is in good...
-
Young lad dropped over to gimme a hand tidying up loose ends to 1st fireup. A couple small water leaks and rad puked some water(no stat...
-
autopar3000 replied to the thread Flex plate for 5.9 and 904.Yeah, 96 and up. When they switch to OBD2 and to the 46re they moved the weight from the converter to the flexplate.
-
autopar3000 replied to the thread Flex plate for 5.9 and 904.When I was running a 904 I used the stock 5.9 flexplate from a 96 and later truck. One hole needs to be opened up maybe an eighth of an...
-
autopar3000 replied to the thread Rewiring my EFI Magnum - 1970 Dart Swinger.Things I haven't done yet: - Install the CEL. The wiring is all there, I just have to put a hole somewhere and put the light in. -...
-
-
autopar3000 replied to the thread Rewiring my EFI Magnum - 1970 Dart Swinger.Final updates on this build. I put some miles on the car to make sure everything was good, then I wrapped up all the wires and put some...
-
autopar3000 replied to the thread Rewiring my EFI Magnum - 1970 Dart Swinger.I adjusted the brake light switch so I could put a few miles on the car before totally wrapping all the wires. Just want to make sure...
-
-
autopar3000 replied to the thread 70 Swinger Dash Question.Rallye dash? In the 30 years I have been paying attention I have never seen a 70 340 Swinger with a knob radio. But that doesn't mean...
