65 Barracuda daily driver
So I cleaned and inspected the old and the "new" rocker arms and shafts. The old shaft had some heavy wear around the oil holes:
![PDA_skCU6mCQcUnact-w=w775-h1034-s-no-gm?authuser=0.jpg PDA_skCU6mCQcUnact-w=w775-h1034-s-no-gm?authuser=0.jpg](https://www.forabodiesonly.com/mopar/attachments/pda_skcu6mcqcunact-w-w775-h1034-s-no-gm-authuser-0-jpg.1716178549/)
A lot of the old rockers had this pointy raised spot on the surface that contacts the shaft:
I wonder if that caused the damage by the oil holes, but a few of the "new" rockers have a similar spot, but not as tall. I looked online at new rockers and they don't have it?!
Anyhow, the part that contacts the valve appears to have been refinished on the "new" rockers and a few are not perfectly smooth, but it's not that bad and I will try to smooth that out too.
![CBEsqL4-LLJsR51PF5T9GNQ=w821-h1095-s-no?authuser=0.jpg CBEsqL4-LLJsR51PF5T9GNQ=w821-h1095-s-no?authuser=0.jpg](https://www.forabodiesonly.com/mopar/attachments/cbesql4-lljsr51pf5t9gnq-w821-h1095-s-no-authuser-0-jpg.1716178553/)