Search results for query: *

That's exactly what i want to do.

So here is another curve ball.. I just found a B-Body 8.75 it says 68-70, will the 489 center section off of my a-body unit interchange? The B-Body already has BBP axles and i have the complete drum brake setup coming tomorrow. Will everything else lineup as far as the leaf springs and...

What backspace is the rear wheel?

I just got the BBP drum brake assy from a fellow member on this site. Should be here Thursday. I just need to buy the drums. The Dr.Diff setup has been out of stock for a year or so. Cass did say he might have more later this year. Thanks for that info, i did forget to mention the rear brakes...

The trans is a 727.. Not sure on the cam, i know the motor has been gone through many yrs ago. We were told it is .30 over, sounds like a mild cam, the car is nothing to radical. Motor was fresh when we got it back in the mid 90's, but the trans went out after only a few thousand miles of...

The car is just a cruiser for now. Someday i think it would be fun to run it down the strip for a test/tune day but nothing crazy. I have thought about the complete rear end deal also, just figured for on extra $1000 or so i know what i would already have and everything would be fresh. Just...

I plan on going through my 8.75 at the end of the season once i purchase everything needed. So as far as i know, it is a stock 8.75 with a 489 "open" center section with stock 5x4 bolt pattern axles. I already have the front swapped out to the BBP so i plan on doing the same in the rear...

message sent

Looks great man! Great combo for your car.

Post pics when you can, I was also debating on these wheels. Just not sure if i liked the Gray. What made you decide on the -6 for the rear vs a +20?

What wheels are you going with? I kind of like the look of a narrower tire in front. Not too narrow but a litte different size. I plan on going with a 245/45 in front and a 255/45 in the rear for my Demon. Atleast until i figure out what wheels i'm going with. I am so indecesive, just want it to...

Would a 255-40 rear tire work? I was looking at the Nitto NT555g2 but they don't have a 255-40 for the rear. I was thinking 245-40 for the front.

XXR 559 Flat Graphite Wheels 5x4.5 - 18x8.5 +20 - 559886696 These are an 8.5 wide wheel with a +20 offset so i think they should work front and rear. Plus they kind of look like a pitchfork, lol

Post your wheel and tire combos. So i found this Demon and really like how it looks. It says it has disc fronts and a stock 8.75 with drums, same as mine. Is 4.5 enough backspacing for the fronts? I would rather use an 8" front wheel,not a 7". The Rear shows 9.5 with 5.25 back space. Looks like...

XXR 530 Flat Black - XXR Wheels - PowerHouse Wheels & Tires Here is another option i found, the front and rear would have the same offset but i think they would work. The fronts just won't be tucked in as far.

Correct me if i'm wrong, but i believe i found a set that may work. I think they would look pretty good on my Demon, it's one of the only ones i can find that i really like so far. Tsw Clypse Wheel 18x8.5 5x114.3 TSW Wheel 1885CLP305114B76 TSW Wheels Clypse Series Gloss Black Wheels | Summit...

Thank you all for the replys, I was hoping to keep the rear end stock and just put a nice set of wheels/tires on, lol I see that is harder than anticipated. I am not much of a fabricator so i was hoping i didn't have to relocate any brackets/mounts etc. I guess i may have to do more research and...

https://www.forabodiesonly.com/mopar/attachments/20160409_141623_resized-jpg.1714937786/ So i have decided to go with an 18" Black wheel like the one pictured, 8" front and 9" rear if possible. I have upgraded the front brakes to disc and the rear will stay drum on my stock 8.75. Both will have...

I am swapping out the old SBP axles in my 8.75 but sticking with drum rear brakes. I found a somewhat local guy that has a pair of 10" BBP backing plates for me. I want to buy all new parts for a complete set of drum brakes. What year car would i search for to find 10" brake parts? I will be...

What are your wheel specs.. back spacing/offset? and tire size, your Duster looks Great! Same setup on want on my Demon!

It'll be fine, thats just told hold the wheel spacers on. lol

I want to convert my 8.75 rear end to BBP axles and would like to find complete 10" drum brakes as well. The backing plates are hard to find and i have know idea where to find a complete assembly. Dr. Diff does not have any stock. Anyone have any for sale? I was debating on a complete rear end...

Did you get your wheel tire combo figured out? Looking for wheels and tires for my Demon still, it's hard to find wheels with the correct B.S. What did you end up with for B.S? Pics would be great if you have any. Thanks

do you a pic you can send me? what were they off of?

He does not have the full Drum Brake Assembly in stock that you have listed, that was my original plan. Now i am going with the rebuild kit but will need backer plates and drums.

I have an 8 3/4 with the SBP axle right now. I plan on swapping the axle out for ones from Dr. Diff with BBP to match the BBP fronts. I am keeping the drum brakes in the rear but plan on purchasing the 10x2.5 kit from Dr. Diff. After doing some research here, i have found that the backing plates...

Anyone know what wheels these are? Trying to find something similiar for my Demon in a 18x8 or 18x9. Been searching and searching trying to find something with the correct backspacing.

So it seems everytime the engine has been running at normal temp for 15 mins or so, if i shut it off, it is a pain to restart. Let say i drive through town and have to get gas, i shut off the engine while pumping fuel, i have to almost floor it to get it to restart. It rolls over normal but just...

Ok so measured the rear to figure out backspacing. Looks like I have 6” from the inner fender to the outside lip of the hub. I have 5 1/4” from the lip of the hub to the inner lip of the rear fender. My 14” Rallye wheel has 3” of backspacing and 2 1/2” front spacing. Do these numbers seem...

Thank you for the reply, lots of great info.