Anyone wanna go halves on 2 3g 5.7's for $1000 bucks

Got a guy parting with 2 5.7 hemi's both water damaged by the storms we had here but they are supposed to run (one has low compression and the other is slightly knocking) I dont see 1 hemi for 1g let alone 2 But I don't need to engines so if we were to split the cost there could be 2 hemi's for 500 bucks each. These motors are located in the midwest but I could arrange shipping if someone wants one.

Oh and I'd be willing to take the worse of the 2 since I plan on doing a stroker so whoever would want the second can have the second rotating assembly to hopefully get one runner out of the 2.

Where abouts in the Midwest? Also truck or car motors? A year on the motors also helps.

Riddler

Where abouts in the Midwest? Also truck or car motors? A year on the motors also helps.

Riddler

2005 300C with 78k no compression in 2 cylinders but runs no harness but complete intake to pan

2007 Ram with 65k runs good but makes noise(sucked in water so probably has a bent rod) complete with harness no computer.

I was going to pick these motors up Monday they are in Wisconsin but I will be bringing them to Illinois.

If no one wants one I will be fixing one to sell since I have no use for 2 engines. I also don't need the harness since I will be going carbed.

Close to the quad cities?

Got a guy parting with 2 5.7 hemi's both water damaged by the storms we had here but they are supposed to run (one has low compression and the other is slightly knocking) I dont see 1 hemi for 1g let alone 2 But I don't need to engines so if we were to split the cost there could be 2 hemi's for 500 bucks each. These motors are located in the midwest but I could arrange shipping if someone wants one.
pm'd

becareful,,, for soem reason people seem to like to drive those cars thur deep water,,floods and such,, seem to eb a lot of those 5.7 from 300,s usually they have a hole or cracked block,,,