Battery cut off switch

So I'm looking at the rear of my 73 swinger and saying to myself: 'self, where the googly are you going to mount the battery cut off switch?'

All I see is drilling through the trunk AND bumper and mounting on the bumper. I'm not really into that but there sure as heck isnt a spot that is jumping out at me other than the very outside corners, which I'm thinking would look way out of place. So where have you mounted yours?

-Sefus

He is mine. Hardly noticeable just to the right of the license plate.

I made a bracket and mounted under the bumper on the right side. Just inside the right tailpipe. Passed tech no problem.

I used a switch with a long arm push pull knob. I drilled a 1/2" hold just above the bumper where its hard to see when the arm is removed. I take it out when I'm not going to the track. You don't even know its there. The switch is still in the trunk and can be used as a master shutoff. It takes five minutes to have it ready to race.

Wow, it really does blend when mounted on the bumper. I might take a look at making up a bracket. Thanks guys!

We mounted ours where the liscense plate light goes.