71Duster
10-24-2006, 12:14 AM
Ok heres the deal I need a driveshaft for my 71' with a 727 and 8 3/4 741 case.
My car has a poorly shortend unbalanced one from a 76 Gran fury four door. This I know because it has the junk yard grease pencil markings on it. I can hear slag inside it rolling around even.
If anyone has one int he province and wants to sell it let me know
Dorian
11-17-2006, 01:20 AM
hi,
will a drive shaft from a 68 318 Barracuda fit?
I believe it has a 904 with a 7 1/4 rearend.
Gary
Medicine Hat
tinman_dn@hotmail.com
71Duster
11-21-2006, 06:14 PM
Not sure, anyone here know?
65Val
11-21-2006, 11:42 PM
Nope, dont think it's gonna fit. The 904 slip yoke will fit in the 727 trans,but,I believe the 727 has longer tailshaft. If not, the 8 3/4 is definitely longer in the pinion area than the 7.25. You'll have to get that shaft shortened regardless.
Hope this helps...
Jims71duster
11-29-2006, 11:22 PM
there is a factory one that fits,,,problem is I don't know which one. I bought my duster and it had a drive shaft and a 4 speed in the trunk. sold the 4 speed but put a 383 and a 727 (it already had the 83/4 in it) in the car. Tryed the drive shaft just for shits a giggles and it fit. So I don't know if the shaft was from the donar 300 or came with the 4 speed but it wasnt custom made
