Proform roller rockers

http://www.proformparts.com/mistore/productdisplay.php?sku=407778&hdwt=31101&loc=101&dealer=&company_id=100719


proform roller rockers, small block, never used, $120 shipped

anyone? price too high?

Pm sent.

Are these a direct bolt on for my 360?
I need to replace the stock factory ones before something bad happens.

That's about 1/4 the amout I have in my harlan sharp setup,I"d try them

pics

still for sale?? l.m.k. fstel@comcast.net

sale is pending on 340 dart

thanks 74 let me know if it dont work out ill take em, tnx

Don't forget the tulip end push rods to complete the package.
I know. I got the set up on my Duster. They work great. Haven't
had any problems in 2 yrs of running them.

Thanks for the pic.
These are 1 to 5 or 1 to 6?

Hey Brian,

Can you tell me what exactly you had to do/buy to get these on your Duster?

I have a dart with a 360 that sees about 40 passes a month these will be going on.

they are 1.5

I got my setup from Northern auto. Catalog supply.
They had the rockers and the push rods to go along
with them. You should be able to get the rods just
about anyplace. I set them just like chevy rockers.
Good luck. Green Duster.

They have a website. www.northernautoparts.com

Thanks for the info and the link Brian.

Bad news!

I think my valves are kissing the tops of my pistons on my drivers side so this 360 will be down for a little while. I am going have to pass on the rockers.

I PM'd 73 Dodgeman and let him know.

Thanks anyway.

Rockers are back up for sale! I do however have a few people interested in them and will sell on a first come first served basis.

340 Dart Pm'd at 12:38 A.M -Passed on Rockers
70Dartman 12:44 AM -Awaiting on Decision
73dodgeman 5:58 PM
Blackace 6:23 PM
Pagilman 8:41PM

Sent you a pm...I will take them ...Lee

If no one else takes them I NEED them for my car. Thanks Jeff

weather these are sold or not,,,ide be intrested if still for sale,,,does any one know how much lift these will work on ??? there web site ofers no info on that???

sorry guys! it looks like 70dartman bought them. should be recieving M.O. soon.

Congrats, Eric. It took a while, but everyone should be happy.

any one know,,,,what lift these rockers are good too ???

Got them on with my MP cam. 484 lift 284 duration.

im looking for a nice affordable roller rocker for the street that will take a 547 lift cam,,,ive read a lot of articles,,none have any thing good to say about roller rockers,,they say all have there faults,,im stil useing 273 adjustables,,

fstfish...I don't think you would have a problem w/ the proform at .547 lift... A friend of mine has some, he has never had a problem...I figure they would be good to .575 to.600 or so...I am thinking of trying them on my .585 lift...I believe they would be way better than the 273 rockers...I am running steel ductile rockers also, but not the 273... Remember, I am just going off of the ones I have seen and just guessing...Lee

hi lee thanks,,for your in put,,,they look a lot like the ones mancini sells,,you have to read the fine print on mancini,,,his are only good till 484 lift,, or some where near that,,thats why i questioned,,it,,,im still not sure what im going to do,,thanks,,

Buy yourself some good rockers fastfish. The piece of mind will be worth it. Ive seen 2 broken proforms at the machine shop I hang around. leaves a lot of carnage. I run comp pro magnums and sleep well at night. this is with 595 lift.

just talked with a guy that has a really good running 360 in a dart,,he has tried all types of roller rockers,,and has had the results that ive read about,,,needle bearings,,,crushing falling out,,,,adjuster screws backing off ,,
ive been running 273 rockers and banana groove shafts for years,,with no problems,,havent even had to adjust the valve lash,,,he went back to an after market 273 rocker,,,only difference is the adjusting screw,,he had to grind out the arch in the roacker as i did,, to clear the bigger springs,,so i guess i will stay with the tried and true factory 273 rockers,i have several extra sets,,why fix what aint broke,,,,, but thanks for every ones input,,

still got the roller rocker'm showing my Mopar 318

pics
i really love my proforms, esp when they broke..

if you still have the rockers Please let me know asap I'll take them ok email me back or call me on my mobile 239-285-6748 thanks

they were sold . i would not have made a negative comment about them while they were for sale out of courtesy.

I'm sorry what was the topic? I can't look away from mopar_1974's avatar long enough to read anything. I'll keep trying though.

Broke an adjusting bolt quite easily. The lock nuts walk out too. Chinese garbage. Got rid of mine on my 360 and went with Crane Golds.

call the mailman up cause I will take them from you NOW !! no bs call me 239-285-6748 ( ray )

hmm dont know how this got brought back up again but these were sold, two years ago :)