AdamR
02-25-2005, 06:57 PM
Im currently running 28X10.5-15s on the back of my car but I'm wondering if I should go with a 26" tall tire to pick up a little gear ratio?
030" 340
9.6:1 compression
Magnum heads unported
XE274H 230/236 .513"/.523" with 1.6 rocker 110lsa
650 double pumper
LD340 intake 1" tapered spacer.
1-5/8" headers 3" exhaust
727 10" converter
3.91s suregrip
3300 lbs with driver.
What do you think. I havent had the car to the track yet so I dont know what its going to run.
green67cuda
02-25-2005, 08:03 PM
I haven't had mine to the track yet either, but i'll be running 3.91s with 26" Drag Radials
just in research and after running my 68 mustang with 3.55s and 26" tires, i think i'll go with 3.91 and 26" for the cuda
.............and the mustang will be upgraded to a 3.89 this year
AdamR
02-25-2005, 09:52 PM
your running a 275-50 right ? Im running a 325-50, was thinking of going with a 295-50
THEWHITEZOMBIE
02-25-2005, 09:55 PM
Why dont u jsut run more gear out back likt 4.10-4.30?
AdamR
02-25-2005, 09:56 PM
Becuase its cheaper to switch tires then to pull the rear a part and add a new ring and pinion, plus bearings and set-up fees.
THEWHITEZOMBIE
02-25-2005, 09:58 PM
Oh so your gonna losse the meats?so when can i expect them at my house for the Zombie :twisted: :thumrigh:
THEWHITEZOMBIE
02-25-2005, 09:59 PM
Theyll go great with my spool an 4.56's
AdamR
02-25-2005, 09:59 PM
I'll be keeping them for back ups.
THEWHITEZOMBIE
02-25-2005, 10:03 PM
:cry: :x oh well at least i tried :thumrigh:
THEWHITEZOMBIE
02-25-2005, 10:06 PM
I think im going down to the tire shop to get the best price on the same tires later this week,my girlfriend is getting me some Draglites for my B-day :cheers: ,an the relo kit from mancini should be here on friday neek week :bounce:
Mopower71
02-25-2005, 10:07 PM
Did you get the 3.91's in the car yet?
What are you pulling out of it?
AdamR
02-25-2005, 10:08 PM
No there not in yet. Its got a 3.23 peg leg in it. :puke:
THEWHITEZOMBIE
02-25-2005, 10:13 PM
No there not in yet. Its got a 3.23 peg leg in it. :puke:Oh how cute :tongue: dont worry i was killing chevys with a 7-1/4 an 2.73's an a peg leg,when the relo kit is in an mini tubed the 8 3/4 is goin under :thumleft:
Mopower71
02-25-2005, 10:15 PM
Try it with the 28x10.5's you might like it. Especially if it's going to be a STREET CAR :jocolor:
AdamR
02-25-2005, 10:15 PM
The only thing I was killing with the peg leg was the right side tire.
THEWHITEZOMBIE
02-25-2005, 10:22 PM
Peg legs are the best,it was so fun racing an that right tire was smokin the hole time,MMAN GOOD TIMES
klrfish1968
03-06-2005, 10:43 AM
One thing about a one legger... it'll always go straight. I know several people that have them in 8 and 9 second dragsters...
