onehellofadart 04-24-2005, 01:26 PM Took the car out today With 28lbs of air in them. They stick
pretty good on the street. No more spinning through 1st and 2nd.
Was going to a car show that was called off on a count of rain.
:shock: What rain its pretty nice out today.
My next life I'm gonna be a weatherman, get paid to make
mistakes, I can handle that pretty well I think :lol:
Any way The parking lot was huge and empty so of course whats
one to do ? Thats right stop and jump on it :thumrigh: .
:burnout: Well the wife says, "I think I hurt my neck on that one.
What else did you do to the car yesterday?"
Needless to say I can't wait till next weekend to try her at the track.
:roll: The Dart that is. :mrgreen:
AdamR 04-24-2005, 01:41 PM Cool, glad they hook good.
mikesduster 04-24-2005, 01:50 PM wait till you drop the pressure ti 18lbs at the track!!!! :puker:
onehellofadart 04-24-2005, 01:56 PM wait till you drop the pressure ti 18lbs at the track!!!! :puker:
I hope your :puker: from G-Forces :mrgreen:
mikesduster 04-24-2005, 01:58 PM oh yeah!!!....you'll feel like this!!!! :shaking:
AdamR 04-25-2005, 08:20 PM Tony does M/T recomend rims screws ?
threefortyduster 04-25-2005, 09:56 PM m/ts sold me on them when my friend with a Dakota R/T on a 100shot hooked on the street. simply amazing for a radial anything.
383man 04-25-2005, 11:16 PM They should work good for you. Good luck and keep us posted on the new best et. :thumleft: Ron
AdamR 05-08-2005, 09:49 PM Mine seemed to stick pretty good too. Hard to tell with only 3.23s.
383man 05-12-2005, 12:38 AM When you gonna take it to the track and try them out ?? Ron
plum360415 05-12-2005, 02:49 AM I HAVE STREET E/Ts 28X11.50 ON WELD DRAG LITES AND THE DONT SLIP ON RIM I RUN THEM AT ABOUT 16-18 LBS. ON STREET AND ON TRACK CANT ASK FOR A BETTER TIRE.
onehellofadart 05-12-2005, 11:27 AM Tony does M/T recomend rims screws ?
Sorry Adam I just noticed your post.
I already had the rims drilled for the b/f/g 's so what the hey:toothy8:
AdamR 05-12-2005, 05:18 PM I bought screws and drilled the rims but bolth rims ended up with wieghts right over the holes. I said screw it and left them out.
onehellofadart 05-12-2005, 05:24 PM I bought screws and drilled the rims but bolth rims ended up with wieghts right over the holes. I said screw it and left them out.
My weight are on the inside rim glued and then a strip of duct tape
over them.
GotDart 05-12-2005, 09:23 PM Did you ever get some pics Tony?
THEWHITEZOMBIE 05-12-2005, 11:38 PM just to get the ball rolling:worthles:
onehellofadart 05-13-2005, 10:26 AM Did you ever get some pics Tony?
Of what ? The tires?
abodybill 05-13-2005, 10:38 AM I bought screws and drilled the rims but bolth rims ended up with wieghts right over the holes. I said screw it and left them out.
adam i checked mine and all 4 are done like tony said weights glued on and duct tape over them.
and i was told i didn't need to screw them down but mine are only the 235's as thats all i can get under the dart for now.
bill
GotDart 05-13-2005, 12:20 PM Of what ? The tires?
Yeah. Can't find the original thread now... but I thought you were going to snap a pic of your rims/tires for somebody to show them the offset. Maybe I was just dreamin'.
GotDart 05-13-2005, 12:30 PM I guess you did post them, here was the thread http://www.forabodiesonly.com/mopar/showthread.php?t=3264 but the pics aren't there anymore. I guess I just missed them.
onehellofadart 05-13-2005, 12:41 PM I guess you did post them, here was the thread http://www.forabodiesonly.com/mopar/showthread.php?t=3264 but the pics aren't there anymore. I guess I just missed them.
Yes they were using too much band width. I kept loosing my accounts.
So I deleted them from linkedimages.
AdamR 05-13-2005, 07:09 PM adam i checked mine and all 4 are done like tony said weights glued on and duct tape over them.
and i was told i didn't need to screw them down but mine are only the 235's as thats all i can get under the dart for now.
bill
Yeah mine have the other type of weights on them.
| 
