Parting out fully loaded 1975 Dart in CT

I have a fully loaded 1975 Dart 4-dr with 36,460 miles that is getting parted out over the next few months, 06370 is where car is located.

Car has 318 & 904 & 8.25, rear window grid defrost, a/c, factory am/fm, factory cruise control, power brakes, factory tint windows, fuel saver warning lamp with fender mounted turn signal indicators.

Deluxe trim around cluster, radio and glovebox. Mint grill and hood, very nice deluxe bench seat with armrest. Frame rails look good too as does the fenderwells, trunk tire well no good though.

Parts I'm using off car- Disc brakes with swaybar, inside hood release. Not going to be using the power brake booster.

Notes-

1) I have to test the cruise control system before I'll attach a price to it. I have to fix the speedo gear in the transmission before I can do so and currently the car has no rear axle in it. Will be another 2 weeks before it has an axle again (I'm doing a swap with my Duster)

If you wish to make and as-is offer on the cruise setup feel free to do so but I'll not put a price on something that I don't know if it works or not.

2) Yes the radio is for sale or trade but one or two people have already expressed interest.

3) There rear axle will be for sale too with 3.55's in a few months, its the detailed unit that is currently in my Duster with 2.45's

Stuff already gone or being used-

Side markers, front arm rests, disc brakes with swaybar, inside hood release.
Hood hinges are SOLD!


Front kick panels $20
Scuff plate set $20
Drivers mirror $20
Stainless B-pillar molding $20 set
Arm rest bases $10 for all
Rear seat, very nice! $125
Rear package tray $20
C-pillar trim both sides $10
Front bumperets $20
Sun visors $25
Fuel saver setup with fender turn indicators, $50
a/c dash vent $20 (see picture)
Windshield trim (4-dr or post car only) $40

Plus shipping, will post more when I have spare time.

Make offers or trades accepted!

Video of engine running complete with howling alternator-

YouTube- 1975 Dodge Dart with 318 running at idle

Radio-

YouTube- DSCN3366.MOV

More pictures-

And a few more... Thats it for now...

Gary

Missed one!

How much for the Speaker Tray/Package Shelf shipped to 31030 Please?

Thanks,
Bruce B.

120 speedometer? and how bout e-Brake cables?

120 speedometer? and how bout e-Brake cables?


Late 74 through 76 uses the slack 85 mph speedo, sorry!

Which cables do you need?

hi, how much for rear seat? if back part of rear seat is 58to59in. across i,m very interested in buying .please reply as soon as possible need bad!!!! will pay for shipping and packing if need be. i,m in ga. 30814
PM me here!

hi, how much for rear seat? if back part of rear seat is 58to59in. across i,m very interested in buying .please reply as soon as possible need bad!!!! will pay for shipping and packing if need be. i,m in ga. 30814
PM me here!

Rear seat is listed as $125, I'll try to take a tape measure to it this morning.

thank you for your reply. if correct measuments advise me how to get money to you and we can get this deal done, thank you again for your time.

thank you for your reply. if correct measuments advise me how to get money to you and we can get this deal done, thank you again for your time.

What rear seat are you looking for? :dontknow:

The 1975 seat I have is 55" at the top, 56" at the bottom and looks to be the same width as the 1967 Dart 2-DR Hardtop rear seat next to it in the garage.

Are you looking for something that fits a B-body?

Edit- Just checked my '70 GTX, 58" side to side.

After reading the description (36,000 miles, "mint," "very nice," etc.) and seeing the pics, I'm just curious to know why you're parting it out???

PM sent about the radio

After reading the description (36,000 miles, "mint," "very nice," etc.) and seeing the pics, I'm just curious to know why you're parting it out???

1) I need the parts for 3 cars I have here.

2) There isn't a body panel that isn't wiped out by the former owner aside from the front bumper, grill center, 1 tail-light, hood and the decklid. I did'nt show the pictures with damage because those pieces are not for sale and this *is* a for sale thread.

3) I have no use for another 4-dr.

Drivers mirror sold pending payment.

How about the cruise did you get it checked out? Still havent heard how much? Pm me

How much for the Speaker Tray/Package Shelf shipped to 31030 Please?

Thanks,
Bruce B.

I'll try to find out today.

Gary

How about the cruise did you get it checked out? Still havent heard how much? Pm me

This is all covered in very first post.

the seat out of the 75 is correct, i just re measured ,tell me what to do as per total cost for you to ship to me here at30814 an i,ll comply asap. looking forword to hearing from you soon, izzy

its been almost 24hrs. since i have heard from you, i do not wish to rush you but i,m in great need of these seats to complete my dart, so if it,s not out of line of me to ask you again for a total price you will need to get the seats to me, asap could you please reply and i,ll get the money to you asap. thank you. izzy

its been almost 24hrs. since i have heard from you, i do not wish to rush you but i,m in great need of these seats to complete my dart, so if it,s not out of line of me to ask you again for a total price you will need to get the seats to me, asap could you please reply and i,ll get the money to you asap. thank you. izzy

Izzy, chill out.

I don't do this as a line a business its just part of the hobby of car crafting. I'm a single father whose daughter is home from school this week and its raining like heck out and packing supplies need to be gathered.

There is also people in front of you who are waiting as well, I'll not shove them out the way to move your request up.

I understand you are in a hurry. If you can't be patient I suggest looking somewhere else, you are rushing me. I'm not going to sell it out from under you if that is a concern.

Hood hinges are SOLD!

was hoping to hear from you by now. contact me about my last message please.

sorry dont mean to rush you i,ll wait my turn, under stand single father bit been there thank you. izzy

A and C pillars are gone, local sale. (Thanks George!)

The drivers mirror??? Gone?? Do you send this to Argentina? Money order payment(Western Union) Thanks

Drivers mirror is sold!

Drivers mirror out to the post office in the morning!

Sorry for the delay on hood hinges, pouring rain all day today the one day I can get outside.

The rear axle should be back in place this week, testing with the cruise control will be right after.

Axle installed! Should be checking out the cruise tonight and pulling hood hinges.

Please pm me how much for the turn signals shipped to 55444? thanks

Pulled the nose off tonight and the hood hinges will be on the way tomorrow!

Checked out the cruise control- The lower cable was shot down at the transmission speedo gear nut. I think I have a spare cable I can try out but it will a few days. The cruise unit itself looks fine and the gears rotate with no problem.

Need the lower ball joint mounting bolts to spindles. just need 2 of them unless you want to sell all 4. let me know 60417 just outside of chicago. thanks.

Need the lower ball joint mounting bolts to spindles. just need 2 of them unless you want to sell all 4. let me know 60417 just outside of chicago. thanks.

I have use for them, sorry.

ok thanks for letting me know.

Getting rid of the rear bumper and any idea if it works for a 75 dart sport too?
Also wondering, are you getting rid of the a/c mechanicals?
Did I read it correctly that you are keeping the 8.25?

what you looking to get for the motor and trans? i am in ny so no shipping necessary

Getting rid of the rear bumper and any idea if it works for a 75 dart sport too?
Also wondering, are you getting rid of the a/c mechanicals?
Did I read it correctly that you are keeping the 8.25?

Rear bumper is damaged, still up in the air on the a/c stuff (my dusters doesn't work right and I might need the parts) and for the moment I'm keeping the 8.25.

04-30-2010, 10:43 PM * #36
shimsham1
Senior Member
*

*
Join Date: Jun 2009
Location: new york
Posts: 106

View Photos By: shimsham1

what you looking to get for the motor and trans? i am in ny so no shipping necessary
__________________

*

what you looking to get for the motor and trans? i am in ny so no shipping necessary

Pending deal with someone in CT who also wants the rear deck, sorry.

Are you going to do any cutting on the car?

Are you going to do any cutting on the car?

Yes, what do you need?

Is the hood sold?

Is the hood sold?

Nope.

Let me know if the engine and trans deal falls through. Thanks for the response!
Jay

Interested in the glove box door. pm me please on cost and condition.

I take it you are using the K-member, and lower control arms?

P.M. sent

pm on the way

Are you going to part the v-8 spool mount k-member? got any pics?

I take it you are using the K-member, and lower control arms?

I'm going to use both in my '67 Dart since it has the oddball one year only k-frame.

oh okay! I could trade you my 68 V-8 k-frame plus give ya some cash for that spool mount one! I kinda need it! haha....just thought I would try...:)

hope i don't sound like a tool...lol

I am interested in front seat with armrest if still available. I am in Connecticut so no shipping is necessary. Do you have a price in mind?

oh okay! I could trade you my 68 V-8 k-frame plus give ya some cash for that spool mount one! I kinda need it! haha....just thought I would try...:)

hope i don't sound like a tool...lol

Thats a tempting offer, I perfer the old style k-member actually for the Dart.

I'm still going to use the lower control arms and swaybar though for my '74 Duster.

Thats a tempting offer, I perfer the old style k-member actually for the Dart.

I'm still going to use the lower control arms and swaybar though for my '74 Duster.

the later swaybar wont pass through the earlier K

the later swaybar wont pass through the earlier K

"I'm still going to use the lower control arms and swaybar though for my '74" Duster.

The Duster has spool mount k-frame but didn't come from the factory with a swaybar.

The Dart will use either a spool mount k-member or the early style with a large aftermarket swaybar.

I was going to use the '67 k-member that was in the car (after all I already own it) but the thought of the one year only idler arm keeps nagging at me...

pm sent

pm sent

I'll be at Englishtown on Saturday for the annual Mopars at E-town event for anyone looking to save on shipping. Just try to get hold of my in the next day if you want me to bring anything down.

Gary

how much for the ac blower "knee knocker"

how much for the ac blower "knee knocker"

$10 for one of the two pictured.

hey, Im located in Southington CT. Was wondering what the deal with the rear end is? If i read correctly, you're currently not selling it but you will be?

I interested in it however if it is for sale, or if you're sitting on any other a-body 8.25. I bought an f-body one for my 73 Dart and the extra 3 inches of width won't clear the quarters.

Thanks in advance.

Cruise control on the Dart works fine- Tested it out after replacing the lower cable from another 74 A-body and all functions work perfect (on/off, resume, set and brake override.)

Gary

Cruise control on the Dart works fine- Tested it out after replacing the lower cable from another 74 A-body and all functions work perfect (on/off, resume, set and brake override.)

Gary

how much do you want for it?

I'm still interested in a complete cruise setup also.
Too many wants and not enough coins.

Glovebox pic as requested.

how good is the dash pad ?any cracks?

how good is the dash pad ?any cracks?

Not for sale, a spare for the two a-bodies I own.

gdonovan i sent you a pm on the cruise.

Gary

how much for the complete kickdown linkage and intake bracket for linkage ?
thanks
Terry

How much for the heater/ac box with the controls and vacuum harness? I would also need the firewall section that the box mounts to. Thanks.

passenger headlamp trim sold and shipped

how much would you take for the front clip (hood grill fenders radiator support)

how much would you take for the front clip (hood grill fenders radiator support)

Sorry, I can't help you.

Bench seat is gone.

Pm sent

Im interested in the front frame rails/inner fenders/cowl from the torsion bar crossmember forward. Also the rear frame rails.

Im interested in the front frame rails/inner fenders/cowl from the torsion bar crossmember forward. Also the rear frame rails.

I'll drop you a pm.

Do you want to sell the electric bulkhead fitting?

Do you want to sell the electric bulkhead fitting?

Which side?

hey whats up?do u still have the rear package tray?i sent a pm on it to.

Hey do you still have those rear sail panels? If so how much for shipping to 85044

Do you still have both sides front fender wheel mouldings. Would lik to buy send anwser and price to tonyfrost@centurylink.net thank you.

Do you still have both sides front fender wheel mouldings. Would lik to buy send anwser and price to tonyfrost@centurylink.net thank you.

I'll check and let you know.

Hey do you still have those rear sail panels? If so how much for shipping to 85044

I think they were sold, I'll look today to double check.

In about 2 weeks were going to have a sawzall party on the car while my current project is at the body shop. I'm going to save everything I can.

Lost storage on it.

PM sent

Hey Im still waiting on an anwser on the front wheel mouldings please get back to me Tony.

I am interested in the door mirror, I have a bother who lives in CT. Woul;d it be o.k. for him to check it out and make a deal on the spot?

I am interested in the door mirror, I have a bother who lives in CT. Woul;d it be o.k. for him to check it out and make a deal on the spot?

pretty sure the mirror was sold

front passenger side floor pan.From just in front of the seat up to the firewall seam.Any good and are you willing to remove it?

Sail panels, Door Mirror, or Vinyl trim piece across a-pillar availabe?

Do you still have the front seats? If so how much $

still interested in rear + driveshaft

Two PMs sent, zero reply received… :?:

i am interseted in the adjusment parts for the ac and the heater control valve you can pm me if you like im in ny thanks

im interested in the adjusting pulley for the ac and possiblly the heater control valve thanks you can pm me

How is the woodgrain and chrome on the instrument bezel?

Do you still have the front seats? If so how much $

Sold already

Two PMs sent, zero reply received… :?:

Had to drive 5600 miles in 4 days with a sick co-driver, will be several days before I'm caught up.

Okeh, that's cool. Didn't mean to be uppity.

how much for the decklid??

how much for the decklid??

$50

How is the woodgrain and chrome on the instrument bezel?

Not bad if I recall, only picture I can find in my files at the moment. I think I have it here at the house as I already pulled it to get at some wiring.

im interested in the adjusting pulley for the ac and possiblly the heater control valve thanks you can pm me

Most of the a/c parts I'm saving for spares as my Duster is an A/C car too, sorry. The valves are on ebay for reasonable prices, I think I picked up one for $24

front passenger side floor pan.From just in front of the seat up to the firewall seam.Any good and are you willing to remove it?

It looks good from the bottom, I'd wait till the carpet is pulled though to make sure.

Sail panels, Door Mirror, or Vinyl trim piece across a-pillar availabe?

Of those pieces only the trim is available.

I need the front passenger floor.How much?

I need the front passenger floor.How much?

I need to pull back carpeting to check condition.

Hey Im still waiting on an anwser on the front wheel mouldings please get back to me Tony.

Pics attached- Pass side looks ok, drivers looks a little dinged but fixable.

OK let me know.....

still interested in rear

How much for the dash wire harness?

Missed one!
How much shipped to 35907 thanks

How much shipped to 35907 thanks

$30 shipped fair? LMK, pick which one you want.

I have storage for the car again, should be safe for another 6 months (whew)

Do you still have the cruise control or am/fm radio?