FASTBACK340
08-30-2004, 10:47 AM
In a previous post I mentioned a problem with my Z bar attaching pivot on my Lakewood scattersheild and Brett mentioned an adapter. Does it look anything like the one in the bottom of this picture?
http://mediaservice.photoisland.com/auction/Aug/20048304108122096966221.jpg
If anyone can help I'd appreciate it. I'm in a bind.... :eye:
BARRACUDA340S
08-30-2004, 07:04 PM
The black one on the top left looks like mine. I got a new Z bar kit from Jim's parts. Mine works fine. Are you sure that those are correct? did they come off the car or did you just put the pieces together a long the way?
FASTBACK340
08-30-2004, 08:14 PM
The black one on the top left looks like mine. I got a new Z bar kit from Jim's parts. Mine works fine. Are you sure that those are correct? did they come off the car or did you just put the pieces together a long the way?
Mine was cobbled together from bits-n-pieces that I picked up here and there. With the exception of my Z bar that was "massaged" with a hot wrench, everything operated fine. No binding, high pedal, full release, and no grinding. Geometry was parallel & square. I just have no idea what pieces I used. I know I had a B body fork in the stock bellhousing because I had to use an A body fork in the scattershield. My clutch set up is the actual definition of bastardized. It has worked flawlessly for 2 yrs, now I want to improve on it and I get stuck.
<sigh.....>
BARRACUDA340S
08-30-2004, 09:03 PM
you might want to order new parts that you know are right. The brackets may look similar but if they are off just a bit your gonna have headaches.
