Recent content by 72BBSwinger

Couple of interior pics

The engine is a 2006 6.1 Hemi that I built to 4.065x4.05 bore stroke with all Manley components so it is now 420cid and 6.9L ish. It has CNC'd 6.1 heads with Manley valves, springs, locks and retainers. Comp custom grind cam .600/255/247/114, Manley pushrods and stock lifters. ARP head bolts...

1972 Dodge Dart Swinger Built stroked 6.1 Hemi, Goldbox EFI Viper 6spd, dual disc, pistol grip Strange S-60 4.10 gears, 35 spline Big Ford bearing hybrid ends 14" SRT front rotors/ Viper calipers, 11.75" 2 piece rear rotors and Wilwood sliders in back Factory welded K frame,Borgeson steering...

I mounted my Gold Box here: But the plug ins are at the top.

I thought the 2005 Truck manual pcm was THE one to use on a pre-VVT engine?

I know, luckily mine didnt need adjusted.

Me and a few others are using the heavy duty Transpo regulators, and they are adjustable although mine is right on 14.2V out the box. http://www.ebay.com/itm/like/142081547121?lpid=82&chn=ps&ul_noapp=true

Wheelbase differences is in rear floorpans, back seat footwell.

Lifter tick that goes away with rpm doesnt bother me. Tick from a collapsed lifter is there ALL the time. 6.1 lifters are used in most hipo builds on Gen III's. Have you tried thicker oil like 15W50 Mobil 1?

Im afraid if you change them, it will still be there. Maybe verifying pushrod length first before you pull the heads.

If you had to cut the shaft, you could've just cut the manual shaft?

How bad do they tick? Mine tick a little at cruise after a flogging, but dont tick at start up and idle.

I would just get a kit for a 5.7. Some have sonic tested the blocks and went to a 4" bore but even staying at 3.97 is big enough. A 4.05 crank will get you a 392, a 3.79 gets you in the 366 neighborhood. Cubic inches with a turbo only makes you need a bigger turbo.

Get a car engine with as low of miles as possible, a 6.1 preferably. Yes Yes Stock K unless you have money to burn

No they are discontinued American Racing Shelby Redlines. These have the right backspacing but you cant get them anymore.