Recent content by 89.Fifth

So a lot of interest but no one willing to take it. I'm calling the scrap yard on Saturday. Please come get it before I do that. I'd rather not, once was painful enough.

Cleared, DM me.

LaGuardia and JFK are equally close. I can pick you up from either.

2.2 gear and I have 2.7 and a sure grip to go with it as well as the speedometer gear. The AC was completely redone with a NOS compressor in 2019 but will need to be serviced again. All new upgraded brakes on the front and maybe 5,000 miles on the rear brakes. 5 leaf rear springs done in 2019...

The motor is in the car and has 10,000 miles. I bought it from the guy who built it and it has 2,000 miles on it then. This car was my daily driver until I parked it and I personally took a 2,000 mile road trip in the day after I dropped in the motor. My buddy keeps it at his place where he...

First $1000 takes it home otherwise I'm calling the junkyard and they'll recycle it. Owned since 2013 Tons of work put in (what else is new?) 8 1/4 Rear end (includes 2.74 gears and a sure-grip) Big Front Brakes 11.75" Custom built 318 with Wiseco Forged Pistons, Comp Camps 614, Demon 625 Carb...

Just a note: The carbs and heads are not free but for sale separately. I have Two sets of '302 heads and one set of Magnum heads

Hey guys I have a ton of parts sitting in storage that need to go. Unfortunately I have to get out of the game and there's nothing much I can do except give everything away. Pick up days are 12/17 and 12/18 and after that it's going in the dump and I'd rather not have to do that. Parts are...

Do you have a photo of the courtesy light?

For a built Turbo Slant 6 that's a steal. Wish I had a car to put it in!

Do you have any more of these? I'm looking for a pair from the second pic and one from the first pic. Thanks!

So it'a 3.58 stroke but with 273/318 mains? Any work done to it or has it been Mic'd?

Do you have a 27 Tooth?

Everybody saying to swap in an overdrive... yeah. That's a LOT of work. Not saying it's not worthwhile, but it's a big project. I would get 2.71 gears with the sure grip. I would also swap the intake for a ported SP2P with the long skinny runners. Your intake has a relatively big plenum volume...

You most definitely can put a 360 crank in, if it's machined for the 318 journals. You can buy them new and build yourself a 346. In fact the current Hemi is a 3.91 bore 3.58 stroke motor. Parts you choose depends on your car, it's weight, the intended use, gearing, driving habits, etc. I'm...