cpearce's latest activity
-
cpearce replied to the thread 1 3/4" Headers Verses 1 7/8" on a Healthy 408....Is There a Big Difference??.Thanks for your response. -
cpearce reacted to 33IMP's post in the thread 1 3/4" Headers Verses 1 7/8" on a Healthy 408....Is There a Big Difference?? with .With that much motor, and improved gearing, I'd run the big tubes. I ran 2" 3.5"collector custom headers on my n/a small block, didn't...
-
cpearce replied to the thread 1 3/4" Headers Verses 1 7/8" on a Healthy 408....Is There a Big Difference??.I'm glad to hear this, thanks very much!
-
cpearce replied to the thread 1 3/4" Headers Verses 1 7/8" on a Healthy 408....Is There a Big Difference??.My W2 head 408 made made really close to 550HP with a single 4bbl and TTI 1 5/8-1 3/4 stepped headers. I recently came across a set of...
-
-
Check out engine masters episode’s for more information. I think you’ll find there are also header wraps. The coating & wraps don’t...
-
cpearce reacted to plumkrazee70's post in the thread A body with an A833 and a Gear Vendor installed with .I would strongly advise against the OD gesrset. I had the set in my Dart and the shifting was horrible. I couldn't downshift into 2nd...
-
cpearce replied to the thread A body with an A833 and a Gear Vendor installed.What is current pricing on them?
-
cpearce reacted to HemiDenny's post in the thread A body with an A833 and a Gear Vendor installed with .Installed a GV in 2009 when this Hemi Duster was built. I would do it again, a simple toggle on the right front of the bucket seat...
-
Keeping my over-center spring. Good quality B&B clutch.
-
cpearce replied to the thread Clutch advice.I am currently removing a McLeod RXT dual disc ceramic diaphragm clutch from my Dart. I was talked into this clutch in 2018 when I...
-
my personal one is mcloed b&b/long pressure plate with organice disc., works great. , its simple and works
-
This is a R4 340 4 spd swinger
-
You're close, it's actually a Y3 ?? I believe 340 swinger. Very rough. Trying to decide what should I do with it. Not much left but...
-
cpearce replied to the thread Do I wait for the 5 speed?.Looks like an R4 Swinger there! Care to share any pics?
-
