Recent content by davek31

  1. D

    Center Link

    Thanks the spacers on my kit are 2.6 inches. which when assembled would give something like 4.2 face to face.
  2. D

    Center Link

    BTW - Make sure you get them right because they wont come out in one piece thats for certain. If you had told me the bump goes down I would have just ordered new bushings wouldnt even attempt to get them out in one piece.
  3. D

    Center Link

    Actually it took about 30 minutes. I used the Poly bushings. I used dawn soap and a lot of it ( a lot cleaner than grease I guess any lube would work well), Put the housings on the bar, and double check you have left and right on the correct side, I offered mine up to the K frame just to be...
  4. D

    Center Link

    talking about left and right my 69 barracuda also looks symmetrical. While we are on the left right question my swaybar has a little hump on it does it go up or down, from the manual it looks like it goes up so thats the way I installed the bushings. If I got it wrong I'll probably have to...
  5. D

    Power Steering Box question

    Was that one of the Cardone boxes, I have one on order from summit been waiting almost 6 weeks, its on back order, dont hear very good things about Cardone, was thinking of doing it myself but I dont want to get into something I may not be able to finish. So I'll spin the wheel and see what happens.
  6. D

    Help Poly LCA bushing install.

    Well I dont think that bushing is coming off, I put in the lathe and skimmed it down didnt spin or move, so I ended up with a pretty good looking pin. popped the end of the pin close to the bushing with a rounded end center punch in 4 places to roll a little metal over the sleeve. it aint going...
  7. D

    LCA strut rod bushing.

    Wondering why no one has cut a stock stut rod in half and threaded the ends and used a coupling nut. Just a thought.
  8. D

    LCA strut rod bushing.

    Maybe these wil fit moog k7040, tho I would prefer Poly. https://www.summitracing.com/parts/mog-k7040/applications/year/1969/make/plymouth/model/barracuda?prefilter=1
  9. D

    LCA strut rod bushing.

    Call me dumb forgot about the large washers duhhhhhhhhhhh. But ..... With the washers it seems the bushings are a lot fatter when installed would not be able to run the nut down past the cotter pin hole. The K frame is stock 69 as far as I know. Nothing easy on this exercise. Can anyone help...
  10. D

    LCA strut rod bushing.

    Just trying to install control arms on my 69 barracuda, I'm using strut bushing poly bushings PN 4-1202 from summit. They are the 2 piece with a sleeve. Unfortunately the sleeve is the same size as the step in the strut, the bushing can just push back over the step. I think something is wrong...
  11. D

    Steering gear box

    MyMopar - Mopar Forums & Information - Service Manuals
  12. D

    Steering gear box

    Here ya go every manual all in one place MyMopar - Mopar Forums & Information
  13. D

    Steering gear box

    Rebuild box from summit racing $109, at least that's what I did. Otherwise get the manual, its available on line for free.
  14. D

    Help Poly LCA bushing install.

    Thanks for the pics makes things a little clearer. My real question was that the OD of the bushing is about .942 which is the same diameter as pin portion adjacent to it. My bushing has a slight bulge at the end, as if it has been pushed in to far and has ridden up slightly on the .942 dia of...
Back
Top