Headintheclouds's latest activity

  • H
    Headintheclouds replied to the thread 42RH advice needed.
    The lever is about 2" from centre of shaft to where it joins to kickdown rod.
    • Idle.jpg
    • WOT.jpg
  • H
    Headintheclouds replied to the thread 42RH advice needed.
    I managed to get the car in the workshop for a few minutes today. It looks as though the kickdown operating arm is very slightly longer...
  • H
    Headintheclouds reacted to Clelan's post in the thread 42RH advice needed with
    Like
    .
    Make sure your kick down linkage is correct before you tear anything apart. That is cheap to free. Make sure your kick down arm ss all...
  • H
    Headintheclouds replied to the thread 42RH advice needed.
    Approaching retirement with way too many projects part done so I paid a garage to change out the transmission. The mechanics seem...
  • H
    Headintheclouds replied to the thread 42RH advice needed.
    What am I looking for when I drop the pan? I replaced the pan with a deeper aluminium unit when the transmission was installed less...
  • H
    Headintheclouds replied to the thread 42RH advice needed.
    Thank you for the speedy and helpful replies. It did smell a bit... Kickdown linkage is rod all the way. Is it possible that this...
  • H
    Headintheclouds replied to the thread 42RH advice needed.
    Most of the fluid was drained for shipping before i got it but it didn't look too bad. It has new fluid in it now. What is most likely...
  • H
    Headintheclouds posted the thread 42RH advice needed in Transmission and Drivetrain Tech.
    I have finally installed a 42RH in place of my 727 and all seems well when driven in traffic at moderate throttle. Driving at about...
Show older items
Back
Top