Recent content by Mark pollard

Pics of crown

Flaming river sells a 16.1 manual steering box also! My question though. I have a stock 74 dodge dart with front sway bar. I pulled the stock front sway bar out to replace all bushings and refinish it. I didn't pay attention to which way it came out. So does the stock front sway bar crown up or...

Hey no sorry I was wondering for the stock k frame and steering linkage. Is it suppose to be a front sump?

Hey guys I have a stock 74 dodge dart 318. Is this supose to be a rear or front sump?

So the pitman arm has two nuts. Bigger nut to steering box. Smaller castlated nut to center link. Which torque is the, "pitman arm nut @175" And what would be the torque for the other nut? Please and thanks..

Which hemi and year?

Do you know what Idler pulley and belt size for the a/c bracet? To run set up you have on post 33 with no a/c or p/s

I really want to run my belt conf. Like dusted did in post #33. But I want to use the stock mount that includes the a/c. Mine is cut to mimic the a/c delete bracket. Ideler i know have to go ribbed but i did read it would work. Just was wondering belt size. And ideler size

Dayco 5060555 pretty sure would be 55.5 inches..

So I didnt know 1st number is rib count, that's pretty cool. But I'm pretty sure last 3 numbers are the inches Dayco 5070563, and should be 56.3.

What exhaust manifolds are those?

I'm running stock a/c bracket with no a/c. Still running power steering. I want to remove power steering pump/pulley. My current set up in pics with stock a/c bracket, and p/s. I just cut the a/c side of bracket off. (Not shown in pic)