*Pentastar's latest activity
-
P*Pentastar reacted to '63GT's post in the thread Revolutionary sight plug - almost no mess !! with .I've been working on this a couple of months. New to FABO and the world ! Racers know, fuel level is crucial for optimal performance...
-
P*Pentastar reacted to Dartswinger70's post in the thread Is it ok to copy a W5 head and make it better or are we just mad at Speedmaster with .Uh huh...everyone is broke but going racing... :lol:
-
P*Pentastar reacted to tonysrt's post in the thread speedmaster stuff pulled from Summit racing shelves with .I feel bad for the honest guy trying to make a living selling a great product that works and gets ripped off by a copy that doesn't...
-
PAn oldie but a goody: I can't add any more than that- it pretty well covers it all.
-
P*Pentastar reacted to 440 Mike's post in the thread 727 no reverse, forward in neutral after rebuild with .Just my opinion, but I wouldn't take anything back to someone that screwed it up in the first place. If they can't do it right for...
-
P*Pentastar reacted to 408 swinger's post in the thread 727 no reverse, forward in neutral after rebuild with .You have a problem in the forward clutch pack. As in, there is a mechanical issue locking the clutch pack all the time. Does it seem to...
-
PI can show an even better HEI setup. This is the parts needed to put together an 8 pin weatherpac system. The 8 pin module and matching...
-
PMopar HEI conversion With inexpensive new '95 Ford F150 2 post E-coil. Easy to wire. This e-coil runs straight 12 volts, no ballast...
-
PShocks don't add support to the suspension, they just dampen the oscillations. You need heavier torsion bars (or remove/cut down the...
-
PThe SBM rockers are quite short. Interference with the springs, especially springs with a bigger OD is possible. That would have nothing...
-
P*Pentastar reacted to Icetech's post in the thread 318 low-rpm performance ........... for the NEWBE with .The answer is "Magic!!!" same reason a 408 is ungoldy amazing and a 390 is garbage :)
-
P*Pentastar reacted to Bodyperson's post in the thread What's the best way to find a dead cylinder? with .Water spray bottle on manifold
-
PWhat rear gears are you running ? 4 gear or auto ? Guessing by saying 325 hp your saying you got the high cr & 2.02 340. Stock specs...
-
P*Pentastar reacted to CFD244's post in the thread BAD MECHANICS - Thermostat and Radiator Fan Blade with .Welcome to the classic car hobby. I wish I had your problems :)
-
PCut down a 2" block. That's what I usually do on early A-bodies to get 1 1/2".
