Recent content by scoobyowner

i will take some pics and post this weekend... i looked up a replacement switch at rockauto.com and their switch picture shows an 8 wire connector and a 3 wire connector, i have 3 broken wires on the t/s switch, but should be able to track em down with the schematic, thanks for posting

anybody have a wiring diagram or can tell me where the small 3 wire connector goes off the turn signal switch? all 3 wires are broken right at switch. i dont know where the connector goes, is it in the column or go all the way to the dash? btw hazards work, horn and blinkers do not. thanks

how long did it take you to get the heater a/c box out?

ron and matt i hope yu enjoy the car, i love the scamp. it was great to mmet yu guys excuse the spelling errirs my pain meds are kicking in. stay in tiuch and send locs of pics! enjoy the car jim

personally i think i'd rather push than put a poorly designed gm part on my car, these units don't last anywhere near as long as the mopar factory boxes (most likely due to being mounted directly to a hot distributor). i keep a spare ballast resistor and ignition module in my glove box that...

sorry can only find 1 compressed enough have more will try to post

68 dart chopped wheel wells, cage lexan fenderwell header 440. engine is steel crank small cam440 w single plane intake and 850 holley electric pump and 8 gallon fuel cell. 3500 stall manual valve body 727 4.56 spool 8.75 w leafs and ladder bars car is 95 % assembledhas lift off steel front...

interested in a trade for a 68 dart drag car? cage, lexan 4.56 spool, big slicks, etc just no time to finish