Recent content by Scottd9990

  1. Scottd9990

    Need correct Pitman arm

    I also need the larger pittman arm with nut up for my 66 Barracuda. I installed a 73+ PS box and now can't connect to the center link due to taper is wrong way. Do I need to change out center link and idler arm setup, or can I just get a large hole pittman arm with nut up connections?
  2. Scottd9990

    440 in 73 Dart Sport, Convert to Manual Brakes?

    Ok, question for the Mopar Gods here: I have a 73 Dart Sport currently with power brakes, Wilwood Disk brakes all around. I am going to install a 440 engine so power brakes have to go. I have the bracket that converts petal travel to the booster now. It looks like I can pull off the master...
  3. Scottd9990

    power brakes for 440 a body?

    question for the group: I have a 73 Dart with power brakes, and going 440 engine. What do I need to convert over to manual brakes. I am using Wilwood Disk Brakes all around.
  4. Scottd9990

    Educate me on 5.9 Magnum Roller Rockers

    My cam is close to yours so think I will stay with 1.6 rockers. Still have not decided yet.
  5. Scottd9990

    [WANTED] FENDERWELL HEADERS FOR BIG BLOCK

    Heck yea! My 8.75 is a 489 case (pretty sure)
  6. Scottd9990

    Educate me on 5.9 Magnum Roller Rockers

    Not really looking to go more lift, just less friction. Already using roller cam (Comp) and 1.6 ratio rockers (Stock) which work very well up to 6200 or so. Just looking to free up some extra HP if I go roller rockers. Yes? No? Also looking at possible E85 conversion. I heard from local Drag...
  7. Scottd9990

    Educate me on 5.9 Magnum Roller Rockers

    I am interested in Roller Rockers for my 5.9 Magnum engine (1999) I have a mild build with EQ Heads, Comp Cam (506 lift) Airgap intake, Dougs Headers! Educate me on best roller rockers for Magnum 5.9. I see the Hughes Engines sets. Pretty Expensive!! Looking best bang for buck. Scott
  8. Scottd9990

    [WANTED] BBP Front Spindles and A Arms

    I am converting my 66 Barracuda to BBP 4.5" and Disk Brakes from 73. I need the upper A Arms and Spindles. Have everything else. Located Concord NC. Thanks!!
  9. Scottd9990

    [SOLD] Upper Control Arms. Big Ball Joint. 73 74 75 76 Duster Dart Demon Valiant

    Next if they come back up for sale. I also need the front spindles if you have any?
  10. Scottd9990

    EQ heads from odessa in Clearwater

    I use EQ Heads in my 5.9 Magnum and they run Great!!
  11. Scottd9990

    [WANTED] FENDERWELL HEADERS FOR BIG BLOCK

    I would trade for a 8.75 SureGrip in nice condition as well.
  12. Scottd9990

    [WANTED] FENDERWELL HEADERS FOR BIG BLOCK

    I have a 66 Barracuda that I just can't bring myself to cut up. Putting the 383 in this winter. Feel free to send me a message. Located in Concord NC, just outside Charlotte
  13. Scottd9990

    [WANTED] FENDERWELL HEADERS FOR BIG BLOCK

    Mine are used but in very nice shape. They do have clearance dints on each header from PO. I have not installed them and have decided to go with normal headers (typical down the side). Here are pictures. I paid $600 for these. Make offer! Not sure about shipping? Big Box!! Would prefer to...
  14. Scottd9990

    [WANTED] FENDERWELL HEADERS FOR BIG BLOCK

    I have a nice set of Hooker Super Comp Headers for sale. Concord NC
Back
Top