Recent content by Trojmn

about the right size to reinforce LCA pin tubes

A few weeks ago i used this to repair a urethane bumper cover tear in the mounting ear. It cures very nicely, very hard yet flexible enough. Worked very well for my application. Supposed to beable to sand and print it. for $7 at your walmart, i'd give it shot. For the crack, I would glue...

I just did that either last year or the year before! Mine developed a steady drip out of one of the connectors. Pretty easy to get to and cheap enough. I didn't know about the improved replacement. Next time I'll do that!

right on. my commentary was that, at least from what i saw, you ought to be a long way from enough miles and tanks especially when trying to be objective. To put it in perspective the difference between your initial 13.5gal avg and the 13.72 mpg improvement is a savings of 0.23Gal of gas in...

controlled MPG testing is actually *really* hard to duplicate. I had a 130 mile round trip commute ~3000 miles a month and it was hard to test for MPG changes. Same 4miles in town, 61miles interstate 5 days a week. With careful observation i could throw out outliers i.e. weather and...

@pishta did. A CSX is a Shadow.

only on 1989 Shelby CSX-VNT

I was at an AUTOx when an OEM aluminum (350z) wheel broke off the hub like that at 45-50mph as the car loaded up into a sweeper. On inspection it had a crack for a very long time before it went. Another kid with bargain basement cheap aftermarket wheel had cracks in 3 of 8 spokes. Cracked as...

Awesome! They regularly do big events at Grissom. there's another club south of you in Columbus cscc-scca.org its been a while but they put on a decent event.

i figured alot of that came down to NOx regulations. If you have a hotter cylinder combustion (e.g. leaner/more complete burn) efficiency goes up.. but so does NOx. For some reason i thought most of europe had looser emissions than US and certainly CARB. Higher gas prices for sure, but looser...

That is EXACTLY what i was thinking... "NO way am I going to do this again, so I'll use this AL body in it so it doesn't warp and cause issues". see how well that turned out for me.

Thanks for the offer on gaskets! I already had a set and not knowing what I needed i ended up getting a new cooler (no body) which came with another set except for the o-ring which was very odd. The last fix (October 2021), i retrofitted the aluminum housing which required a 14+ cooler, and...

I JUST did this in November.... Mine is leaking again, but not as catastrophically as before. You're faster than me, my fastest time all back together was just under 60min. Looks like i'll get one more chance at a new personal record.

Talk him down a bit cus why not? IMO those things got expensive but i'd do 3k if it was well optioned/not rusty. between my dad and myself, we've owned about 15 ramchargers... but none in the last 12yrs+ . quarters infront and behind wheel should have been rusted out, that its not is probably...

I have put a few hundred thousand miles on 2wd Ramchargers and have only ever seen regular 18-19mpg highway on my 92 5.2 magnum. For those that are unaware, that is 600miles+ per 35gal tank! If someone is doing that on a tall 4wd, I'm skeptical, but bravo! For reference, going from the the...