For those running a slant six engine, with the cast alternator mount. Use the Denso alternator for a 88-89 Dodge truck/van with a V-8. Either 90 or 120 amp. Just cut 1/4 inch off the front of the mounting bracket, and bolt on the alternator. Wire the same as the stock mopar charging system with an electronic voltage regulator. However, you must upgrade the charging wire, bulkhead conector, and ammeter to hande the addition amp capacity. Easiest way is to just add a 8 gauge wire from the alternator to the battery positive terminal. Leave all the stock wireing as is. Ammeter will not read correctly, but will still give a charge/no charge indication.
