My 1970 Dart Swinger

Haven't updated in awhile so here goes. I primed about 3 weeks ago and it went on like cottege cheese. I am pretty shure it was a combination of the primer not being reduced enough and the panel temps too hot, it was 95 degrees and I was painting in direct sunlight. Anyway I had to use the DA sander with 180 to knock it down and then block with 180. this exposed several high spots, "shiners".

I primed again yesterday and with the overcast and lower temps and lots of acetone the primer went on smooth. Today I am about halfway done blocking with 400. Hopefully color will happen in a couple of weeks.