post your 9second and quicker combo's here!

OK I finally get to post here now. lol

The engine is a 360 based 408, stock block, tall filled with HardBlock.
Eagle H beams, BPE crank, Wiseco pistons with 20cc dish including the valve reliefs. They are .006 out of the hole. .038 head gasket
51cc W5 heads with 2.08 intake 1.60 exhaust. Flow 320 @ .700
Crane solid roller, 276/284 at .050 with .698/.714 net lift with Harland Sharp 1.6 rockers. Manton series III 5/16 pushrods.
2" primary header, 4" collector, an M1 W5 tunnel ram with two Demon 750 TR carbs.

904 trans, 8.75 rear with 4.86 pro gear, 30 spline Moser axles and 14.5x32 tires.

One and only pass so far leaving at 2000 off the foot brake it went 9.75 @ 134.67 with a broken converter hub, 30* of timing and the jetting is too fat so there will be more to come after I get the trans and converter straightened out.