Installing hydro boost with motor plate

ok some more pics.What i did was use the master cylinder adapter which had a hole just a hair smaller than the back of the hydro boost.i removed the large nut and the safety ring.This allows me to remove factory bracket.Than i grind away just a bit once i had a snug fit I re-installed the nut but can not re-install the snap ring.I will be using a key way to keep it centered and lock tite to keep it from having the loose nut down the road.In my car there only one loose nut and it sits behind the wheel.

You will see from the pics i had to turn it up side down which move all the hoses to the bottom.This will work out well as it keeps the down and tight to the inner fender well.