1968 plymouth valiant 2dr sedan

Today some small progress was made. I say small because Murphy got in the way of doing some serious wrenching.
Before I started it all, I gathered the parts, and was told I should mount the calipers in front of the rotors, so the hose routing wouldn't give any problems.
So I bought the correct hoses and all the other stuff.

Sadly, after mounting the left side first....... completely, I became aware that the calipers wanted the occupy the same space as the sway bar, which meant I had to swap spindels left to right. Aaaaaarrrrrghhhhhhh.

So I now need other brake hoses.
Which ones do I need with F,M,J body spindels and the calipers on the rear of the rotors?

Also some pics,
Installed the lower control arms.
Put new bushings and ball joints in the a-arms.
New ball joint on the nicely painted spindels.
Rebuild the calipers