'69 Dart 6.1 Hemi - More Progress Pics

Not at all AJ, that's what I posted them for. No, I built the 4-Link from scratch, got the sway bar from JEGS, the coil overs from Bouchillon to match the AlterKtion fronts, I believe the springs are 190# on back and 450# on front. The rod ends, weld-in thread ends, and the DOD tube was from Oregon Motorsports. Yes, the cross brace was like $75 from JEGS and there is very little room between the gas tank and the rearend, so I plasmaed off the point of the cross brace (about 4" wide) and welded on a flat 10 ga piece of steel to gain that 1/2" to 3/4" of an inch back.
Behind the two covers, where the sway bar bolts to the lower 4-Link braces, the rubber with steel hoops are modified and bolted in place. Thxs, Tom