Ok, I got the first part of the Mock up done. Next will be setting it back in the car and getting the UCA's installed to find out where to mount the shock brackets. I am pretty sure they will end up really close to the factory spot.
You can see I added the shim on the correct side to add some Positive Caster, seems to me that one of these spacers will add about 3*+ Caster but don't quote me on that. If you put both on 1 side you would get about 6*+ Caster but again don't quote me. I also added some HD Washers in the front mount of the Strut Rod mounting hole.
I took a picture of my soon to be Skid Plate that I will incorporate a Hillbilly Engineered Tow Hook/Tie Down Strap out of 1/2" Round Stock. It will get welded to the skid plate and the K Frame will be notched to fit. You will see what I am talking about when I get there hopefully this weekend.
The factory welding etc is shameful at best. I will be grinding them down and rewelding/gusseting the whole enchilada.