mini tub pictures

junior636 said

Thanks! Im not sure why more people don't do it that way. I hate a car that sits up like a dump truck our has the wheel way inward of the quarter to get it down low. Doesnt look the best in the pics but it turned out good, I'm going to just metal bond the outer piece to the to the inside of the quarter and then seam seal the whole thing up.

Click to expand...

I did a triangulated 4 link on mine with a mini tub. 325/50/15's with a 10" Wheel & 5.5 Back Space. I used a B Body 8 3/4. It gets pretty low and I can bury at least 1.5" of the rim in the wheel well without rubbing anything. It can be done but there is no room for error. I measured the rear axle 10 times before I had it narrowed 3.75" on each side. I have about 1" clearance on both sides of the tire. Alot of work...

Some pictures of the mock up.