blower mtr wire

Ok, at dads for a couple hours, here are some pics and info. We pulled the ac box out to run the dark green and black wire under the hood. I found the 2 wires (dark green and dark blue) that are clipped and run out of the bulkhead connector under the engine bay. The holes they come out of Im not sure how they are referenced in the schematic..but they are in the block closest to the driver side and in the 2nd row, top hole and 3rd hole(see finger pic with frayed green wire). If you use 67dart273 1st schematic as reference, the letters would be "E" and "G". The wire colors match the schematic as they are dark green and dark blue.
I took a look at dads ac compressor and there is a single connector on it and it is light green in color. If we run the dark green blwr mtr wire to the "E" hole and ground the blwr mtr to the firewall is this enuf to get us the blwr mtr working??

I checked inside the pass compartment bulkhead, and the mating wires that match to the "E" and "G" holes are light green mates to dark green and the dark blue under the hood mates to a blue in the pass compartment.

Also, there is a pic of the compressor and its single elec connector...

Guys/gals sorry for the long winded posts, but trying to be as clear as possible and give as much info as possible.

Thanks again!!