Project Riddler's Ride - 1976 Plymouth Duster
Well another day, more work completed. I wasn't able to weld much the last few weeks as I needed a welding extension cord. I was going to make my own but a local store had one go on sale for 50% off. So I snatched it up.
So I'll start off with the hydroboost unit I obtained from a local wrecking yard. Not a bad score, looked fairly new, was clean and the vehicle it was on had the steering column removed. I cleaned it up and gave it a coat of gloss black and high temp clear.
Painting the black...
All done with clear...
I then took my time to make a template to take to the laser cutter.
i then moved on the transmission crossmember. So far I've gotten it all mocked up and tack welded. Today I finally was happy enough to weld everything up. The picture shows the final welds I put on the ends and transmission mount. I'll clean those up some and prolly just primer it. It'll prolly be sent out to be powdercoated with the other parts.
Then finally between the coats of paint drying and the welds to cooling down I got to playing with the gas struts from the hood. I didn't like the way they didn't open the hood only kept it open at certain angles. So I used them on the trunk and with two 90lbs struts the trunk goes up and down with ease!
Finally a video my wife helped me take of the trunk lid opening. Just need to find an electric trunk release now.
[ame="http://www.youtube.com/watch?v=424hdgJIF5s&feature=plcp"]Duster Trunk gas struts - YouTube[/ame]
Riddler
Well another day, more work completed. I wasn't able to weld much the last few weeks as I needed a welding extension cord. I was going to make my own but a local store had one go on sale for 50% off. So I snatched it up.
So I'll start off with the hydroboost unit I obtained from a local wrecking yard. Not a bad score, looked fairly new, was clean and the vehicle it was on had the steering column removed. I cleaned it up and gave it a coat of gloss black and high temp clear.
Painting the black...
All done with clear...
I then took my time to make a template to take to the laser cutter.
i then moved on the transmission crossmember. So far I've gotten it all mocked up and tack welded. Today I finally was happy enough to weld everything up. The picture shows the final welds I put on the ends and transmission mount. I'll clean those up some and prolly just primer it. It'll prolly be sent out to be powdercoated with the other parts.
Then finally between the coats of paint drying and the welds to cooling down I got to playing with the gas struts from the hood. I didn't like the way they didn't open the hood only kept it open at certain angles. So I used them on the trunk and with two 90lbs struts the trunk goes up and down with ease!
Finally a video my wife helped me take of the trunk lid opening. Just need to find an electric trunk release now.
[ame="http://www.youtube.com/watch?v=424hdgJIF5s&feature=plcp"]Duster Trunk gas struts - YouTube[/ame]
Riddler
