Show That Lowered A-body!

The first two pictures below are about 1/2" lower in the front and 1" lower in the rear than I have it now. I doesn't look as low as it is, because my tires are only 24.5" in diameter. So the distance between the top of my tires and fenders give it an appearance than it's not as low as it is.

3rd picture is after I raised it, the bottom of my K-member is 4.75" off the ground. I had to raise it for my TTI hearders. I have to very carefull over those stupid overly tall speed bumps people put in parking lots.

Edit. I run big 1.14" torsion bars. They resist bottoming out a lot more than stock T-bars. No LCA bumpstops. Hotchkis rear springs with stock front hanger to raise rear 1" because of my odd very small diameter tires.

View attachment Hotchkis11_22_10TVSBuildSm49.JPG

View attachment Hotchkis11_22_10TVSBuildSm50.JPG

View attachment Copy of SFSF11SteveWLg17.jpg