Wanted: 14" factory Rallye wheel trim rings

cosgig said
Just to clarify things here, NO rallye wheel came with any other trim ring than the brushed style, with the single exception of the 1970 only 15" rallye. Also, no rallye wheel was even available until 1970, so the 69 stainless items mentioned above are not correct for any rallye wheel.

Although you didn't mention if you were working with SBP or LBP, all SBP rallyes were 14x5.5", no other size available unless it's aftermarket, so the correct corresponding trim ring needs to be for a 5.5" rim. LBP 14" rallyes could have come in 5.5", or 6" on later cars so you need to be sure what you are looking to buy is correct for your rim width.

Hope this helps in your search, Geof

What Moparparts said is correct based off my own experience.

The two trim rings I saw at the swapmeet were not brushed and still sealed in the Mopar packing until I opened one with part number as listed below. I saw the clips and left them. Later ran the part number to figure out they were rare and I had screwed up. Later I saw them sell on eBay just north of $300.00. We have all found differences in Mopar parts since there was more than one vendor that supplied parts.

The part number for the chrome not brushed 1969 ring is 2944161. 1969 was the first and only year the trim ring was used that had the "lip" and was attached to the outside of the rim like a wheel weight does by 4 clips.

Check your 1969 Mopar parts book.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&_trksid=p4340.l2557&item=140060127747&nma=true&rt=nc&si=EemKRKO7NEvyl7ZDWr%252FxLW5GXHI%253D&orig_cvip=true&rt=nc