Zac_F71's 71 Demon

bringing this back up - decided I don't want the car on jackstands anymore (wanna drive it!)

SO here is what's going on- inspected the 7.25 rear I have that I bought off Ebay for $150 - it was rebuilt at one point and not many miles on it since cause there was still marking compound on the ring gear... resealed that and got the brake lines mounted up

Purchased all new 10"x2.5" rear bakes parts (except shoes- they're still good)

Put as much of the 225 back together- removed the intake/exhaust mani studs

The rear axle is ready to go in the car, had to buy new U bolts cause I sold them to a member LOL

Hopefully the brake balance will be ok with 10" disc's and 10" drums lol

went halfs on a 70k mile 64 225 slant motor/3 speed trans for the carb/intake/exhaust so that will be here this weekend!

Just need- plug wires, 3' of 5/16" fuel line and a filter, exhaust tubing to make a decent single "cat- back" exhaust, install the leaf spring shackles, a set of 14" wheels, and finish restoring the interior so a windshield can be installed

pics up tonight!