will this run on pump gas ?

I don't buy into the add 15* to the .050 numbers like KB suggest.


107's and stock heads = no quench.

ENTER YOUR DATA CALCULATED DATA
Cylinder Head Volume (cc) 65 Cylinder Head Vol (cubic in.) 3.965
Piston Head Volume (cc) 5 Piston Head Vol (cubic in.) 0.305
Gasket Thickness (in.) .040 Swept Volume (cubic in.) 45.892
Gasket Bore (in.) 4.10 T.D.C. Volume (cubic in.) 4.798
Cylinder Bore Diameter (in.) 4.04 Gasket Volume (cubic in.) 0.528
Deck Clearance (in.)Note: Neg. nubmer above deck, Pos. number below deck 0 Deck Volume (cubic in.) 0.000
Stroke (in.) 3.58
STATIC COMPRESSION RATIO 10.565

OPTIONAL DATA
Rod Length (in.) 6.123 Adjusted Stroke (in.) 2.814
Intake Closing Point (degrees)ABDC @ 0.050 lift plus 15 degrees 63

DYNAMIC EFFECTIVE COMPRESSION RATIO 8.518