My 71 Demon

Of course now with everything painted there was no way I could keep myself from doing a little mock up to have a glimpse of what was to come!!! We decided to go with an Edelbrock duel plane air gap intake and then the matching 650 carb that Edelbrock helped us choose. We topped it off with Edelbrocks air cleaner for a particular reason. Having the air cleaner being of this design would better work with the hole I have to cut in the hood for the scoop. Almost a ram air effect. :burnout: The headers are full length Hooker Headers. The headers are nice but the finish leaves a lot to be desired. I figured the paint will be chipping off anyway so we will see how this works out. In case anyone was wondering, YES these headers are a MF'er to install. On the forward and aft tubes, inner bolts. There is zero room to tighten that bolt. I had to take a brass drift and a BFH to dimple some extra room just to get an open end on the bolt and make 1/4 turns with it. :angryfir: