1.03 PST Torsion Bars

First Off, I will be the first to agree with you on the fact that there is zero clocking on the 1.03" bars for the Abodies. The orientation is flat-flat because as you increase the bars diameter the less pre-load is needed. We have had no issues with the A Body bars but these are a pro-touring bar and we do state in some instances that it may lower the stance of the vehicle( Stated on our Website).

http://www.p-s-t.com/s.nl/it.A/id.6906/.f?sc=12

I will say that we have done a redesign on our B&E body torsion bar to a 20 degree offset. We have sold hundreds of these bars with only a handful of customers claiming a ride height issue and of those issues they were all with big block B&E body cars. But with about half of those customers it was a clocking issue upon installation and we were able to work with them on correcting the issue. The main reason that we did the redesign was that it was time to re-order from the forge and it was the perfect time to make the change and allow for more clocking/ride height adjustment.

If there is anything that I can help you with please let me know and I will try to work with you.

Thanks
James