Connectors Under Dash

Try a store in your area if you have an electrical supply house nearby ..such as frys or radio shack...have some small tools to help this...spade type that mopar used with the slot in the spade requires that you lightly pinch the slot together then tug on the wire..round ones like under dash switch connector require a hollow tube type,slide over pin.like 67dart273 says all have some type of tab...with tool inserted pull on wire..don't insert tool then pull out tool then tug on wire ,this doesn't work..tug while tool is in there..like the connectors on the alternator ,ill grind a exacto blade thin remove sharp edge and square it off.insert tool and tug ..or sometimes a straight piece of wire like a straightened paper clip ..most connectors hav a slot or place for the tab..look inside and you will see the tab in some instances..and the tool goes in from the front not the wire side..im rambling..you ll figure it out..j