Gunmetal 72 Dart - Cool cruiser build (no... refurb!)

I'm currently working on repairing the rust on the car. Just the bottoms of the quarters, some inside the trunk, then a couple other small areas, that's it (as far as what's visible without stripping the paint, but I'm pretty confident there isn't too much, it's an extremely solid car).

I've done some autobody before, but I've never welded quarter patches, so this will be the first time. I was going to do it today, but the kid got sick last night so I'm home with him all day. But I will get to it soon.

Here are some pics of what I'm contending with. I'll strip it more later to see how bad it really is, but here is the main area. Pass side obviously needs inner and outer, driver's side not sure yet. Biggest challenge on driver's side is actually the dents that you can see above and behind the rust.

Trunk I already stripped down pretty good after this pic was taken, and it's not too horrible. I think to be really right the well should be replaced, just due to all the pitting, but for now I'm just going to clean it up good and protect it from more rust. Pretty unintrusive to do this later. Other than the well, the trunk, extensions etc are in great shape. The rust outside the well is just very light surface, almost like a dusting of rust, no pitting at all. I'll spray all this with color later when I do the outside of the car probably next summer.

I've been watching the Kevin Tetz and a bunch of other videos on doing the quarter patches, so I'm studied up, but now is where the rubber meets the road!

Wish me luck!