400 low buck dont give a

today I installed the damper, torque the heads, put the distributor and lifters in and wrapped it in clear wrapping. parts I didn't have were valves covers, hence the wrap job. I talked to mike about the problem with the intake. the heads may have to be milled enough that about .125" might have to come off each side. included in that was the steel valley gasket has 2 fibers on each side. the intake will still have to be mill if to valley pan or gaskets were used. anyway it's finished as far as I can take it. mike, the cam plug was installed, I just couldn't see it the other day. I want to thank mike aka "earthmover" for giving me the opportunity build his motor.