Cam help

bdusted440 said
Ok I have a 74 duster 3.55 gear a998 trans and a 97 ram van 360 im putting in to replace the shot 318.ive put the thiner head gaskets on it and have the eddy intake.Im going to run the LA front end and keep it looking fairly stock.This is my daily driver so I want to keep the lockup converter.at least until I find an overdrive unit for it.So what cam can I run without changing to a higher stall converter.It has a hydrolic roller in it now and that's what I want to replace it so what 1988 thru 1991 LA cam blank? So I have the eccentric for the fuel pump.

I sent mine off to Bullet Cams, They couldn't do much, but ended up with 477/477 lift, 218/218 dur. @50 & he put it on a 112 from a 114 LSA. It was good for 5K shifts & that was it, In my 71 Swinger i ran 12.5s @ 105 consistantly, the lower end was stock, just an Air-Gap intake, 650dp & headers, 4.10 gears & 2800 stall, pulled 1.79-1.80 60fts. Put a plate system on it & ran 7.3s @ 96 & that wasn't a clean run LOL.