Offset spring shackles hangers set ups
I bought a Mopar Performance off set kit here in the parts section, Maybe Mancinis have them.
hey straightline, I`ve got an idea for u. take one new spring pad, cut it in exactly in half on a band saw. trying to be perfect. you can bring it down to exactly 3/4" wide on a fixed belt sander.
these 2 pieces can be clamped up against ur original spring pads ( leveled perfect w/ them,of course on the inside to to get the offset right)
weld them in short runs, alternating from side to side as not to get your housing too hot and warp it, may let it cool a little between welds. weld it to the pads on the spring surface too, u can finish grind the weld back flat when done. redrill a couple of holes 3/4" over, and it`s done, u don`t have to cut the original pads off, if done this way. I came up w/ the idea when thinking about keeping the pad angle right. worked like a charm, faster, and easier to do, don`t get ur housing hot cutting the old pads off. if you need a spring pad to cut in half, I still have the new one I didn`t use. guess I could cut it and finish sand it for you for a small fee if your worried about doing it yourself--------------------bob:blob:
