Full Emissions hotwire auto hemi wiring harness

Joe Dokes said
Boony,

The better question is, do they actually inspect the car? The same is true in several states in the US but if the car is over a certain age you are not required to have a biennial smog inspection as a result you can pretty much do whatever you'd like.

That being said, the hotwire harness with the full emissions pack should work. Of course you'd need to add the appropriate catalytic converters and the evaporative controls on the gas tank. That would probably be the hardest part.

I'd contact hotwire directly for your specific quesitons.

Best of Luck.

Regards,

Joe Dokes

An engineer has to sign off on it, from what I've read as long as it has all the appropriate emission equipment installed it will be fine, and then no actual emission measurement would be required as you have installed the factory system (providing the law hasn't changed from when it was issued in 2012).

I have cat's installed but I don't know what ones they are, the exhaust shop just put them on for me when I had the exhaust/extractors made and currently have the o2's in front of the cat's.

As for the gas tank I think all that would be required would be the vapor canister, pump etc (see diagram). I already have the EGR valve on the front of the engine.

Worst part is, they require the harness back if they need to add the emissions stuff. That's going to mean shipping both ways plus the cost of the emissions stuff. Not cool